Huawei Technologies Proprietary
56
II. Parameter explanation
z
Status:
select it to enable or disable IP filter, the default is
“Enabled”.
z
Name:
enter a name for the rule, for easier identification
later. Click
Clear
button to delete the entered name.
z
Action:
select “Allow” to permit packets to pass through
the MT882 if they meet the criteria of this rule, and “Deny”
to drop packets that do not meet the criteria of this rule.
z
Source:
when LAN is specified in the Interface drop-down
menu, this filter will apply to packets that have one of the
specified IP addresses as their source, and are sent from a
PC on your LAN. When WAN is specified in the Interface
drop-down menu, this filter will apply to packets that have
one of the specified IP addresses as their source, and are
sent from a PC on the WAN (Internet). If both are selected,
then this rule will apply to packets that are sent from PCs
on both the WAN and LAN.
z
Destination:
when LAN is specified in the Interface
drop-down menu, this filter will apply to packets that have
one of the specified IP addresses as their destination, and
are being sent to a PC on your LAN. When WAN is
specified in the Interface drop-down menu, this filter will
apply to packets that have one of the specified IP
addresses as their destination, and are being sent to a PC
on the WAN (Internet). If both are selected, then this rule
will apply to packets that are being sent to PCs on both the
WAN and your LAN.
z
Schedule:
select the time period for Internet user to
access virtual server.