Huawei B315s-22 Router Manual PDF (Setup & Configuration Guide)
Given below is full router user manual of Huawei B315s-22 router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 1 / 20
B315 LTE CPE
Quick Start
Page 2 / 20
3150****_01
Page 3 / 20
1
1
Getting to know your B315
Power indicator
On: the B315 is powered on.
Off: the B315 is powered off.
Network mode
indicator
Steady cyan: connected to an LTE network.
Steady green: connected to an Ethernet network.
Steady red:
–
The SIM card is not recognized, the PIN has not
been entered, or the PIN verification failed.
–
Failed to connect to a mobile network or an
Ethernet network.
Wi-Fi/WPS
indicator
Steady on: Wi-Fi turned on.
Blinking: a WPS connection is being set up.
Off: Wi-Fi turned off.
Page 4 / 20
2
LAN/WAN
indicator
Steady on:
–
At least one of the LAN ports is connected to a
device.
–
WAN port is connected to an Ethernet port.
Blinking: data is being transmitted through a LAN
port or the WAN port.
Off:
–
No device is connected to a LAN port.
–
WAN port is not connected to an Ethernet port.
Signal strength
indicator
On: signal reception available (more bars mean
better reception).
Off: no reception.
SIM card slot
Install a standard SIM card to access the Internet via
an LTE data connection.
External antenna
port
Connect to external antenna after remove the cover.
WPS button
Press and hold for 2 or more seconds until
is
blinking to active WPS connection when Wi-Fi is
turned on.
Power button
Press and hold for about 3 seconds to power the
B315 on or off.
Reset button
Restoring the default settings of the B315 will erase
all previous settings.
When the B315 is powered on, use a sharply
pointed object to press and hold for about 3 seconds
until
indicator is blinking to restore the B315 to
its factory settings. After the factory defaults are
restored, the B315 will restart automatically.
Power port
Connect to compatible power adapter.
LAN port
Connect to computer, switch, or other LAN device.
LAN4/WAN port
Working as a LAN port when connected to a
computer, switch, or other LAN device.
Working as a WAN port when connected to an
Ethernet port on the wall.
Page 5 / 20
3
USB port
Connect to a USB storage device, or USB printer.
This port cannot be connected to USB host devices
such as computers.
The B315 supports USB 1.0/USB 2.0 storage devices
in FAT32 format of up to 32 GB. Storage devices with
power supply requirements exceeding USB standards
may not work properly. It is recommended that you
prepare an external power supply in these cases.
The B315 is compatible with samba-supported USB
printers.
Telephone port
Not in use.
2
Installation
Scenario 1: Accessing the Internet using an LTE
network
Step 1: Installing the SIM card
1.
Slide off the card slot cover.
2.
Insert the SIM card into the card slot. Ensure that the beveled edge of the SIM card
aligns with that of the card slot.
3.
Close the card slot cover.
Do not remove the SIM card when it is in use. Doing so will affect the performance of
your B315 and data stored on the SIM card may be lost.
19216811.live