Huawei B310s-927 Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of Huawei B310s-927 router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 24
Quick Start
Page 2 / 24
Getting to know your Router B310s
Power indicator
On: the B310s is switched on.
Off: the B310s is switched off.
Network mode
Steady cyan: connected to an LTE network.
Steady green: connected to an Ethernet
Steady red:
The SIM card is not recognised, the PIN has
not been entered, or the PIN verification has
Failed to connect to a mobile network or an
Ethernet network.
Steady on: Wi-Fi turned on.
Blinking: a WPS connection is being setup.
Off: Wi-Fi turned off.
Page 3 / 24
Steady on: LAN/WAN port connected to a LAN
device or an Ethernet port.
Blinking: data is being transmitted through the
LAN/WAN port.
Off: LAN/WAN port not connected to a LAN
device or an Ethernet port.
Signal strength
On: signal reception available (3 Bars
recommended for better reception).
Off: no reception.
SIM card slot
Install a standard SIM card to access internet via
an LTE data connection.
antenna port
Connect to an external antenna after the removal
of cover.
WPS button
Press and hold for 2 or more seconds until
is blinking to activate WPS connection when Wi-Fi
is turned on.
Power button
Press and hold for about 3 seconds to power the
B310s on or off.
Reset button
Restoring the default settings of the B310s will
erase all previous settings.
When the B310s is powered on, use a sharply
pointed object to press and hold for about 3
seconds until
indicator is blinking to restore
the B310s to its factory settings. After the factory
defaults are restored, the B310s will restart
Power port
Connect to a compatible power adapter.
LAN/WAN port
Working as a LAN port when connected to a
computer, switch to any other LAN device.
Working as a WAN port when connected to an
Ethernet port.
Telephone port
Connect to a telephone.
Page 4 / 24
Scenario 1: Accessing the Internet using an LTE
Step 1: Installing the SIM card
Slide off the card slot cover.
Insert the SIM card into the card slot. Ensure that the slanted edge of the SIM
card aligns with that of the card slot
Close the card slot cover.
Do not remove the SIM card when it is in use. Doing so, will affect the
performance of your router B310s.
Page 5 / 24
Step 2: Connecting cables
Once connected to a power outlet, press the power button as the Router B310s
requires to be powered on manually
Power adapter
Laptop, Tablet or Smartphone
To prevent interference caused by radio signals, place the B310s at least 1
meter (3.28 feet) away from telephone and other electrical devices.
The B310s power adapter model is HW-120100XYW. X and Y represent
letters or numbers that vary by region. For details about the specific adapter
model, contact an authorised dealer.
Do not connect the B310s to the telephone wall outlet (or any Public Switched
Telephone Network), because doing so could damage the B310s due to
excessive heat.


4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!