Page 11 / 20 Scroll up to view Page 6 - 10
9
4
Configuring your B315
1.
After a client is connected to the B315 through Wi-Fi or LAN port, launch a
browser on the client and visit web management page (
http://
192.168.1.254
).
2.
Enter the user name (
admin
by default) and password (
admin
by default) to log in
to the web management page.
3.
Follow the quick setup wizard to check or set network connection parameters step
by step. For details, see the help information on the web management page.
Once you are done, try opening a web page on the client to verify whether you have
Internet access.
To protect your account, change the password after your first login. For details, see
the help information on the web management page.
If you modify the SSID and Wi-Fi key, you must set up the Wi-Fi connection on the
client again.
Page 12 / 20
10
5
Frequently asked questions
What can I do if I cannot log in to the web management page?
1.
Check whether the B315's power indicator is steady on. If not, power on the B315.
2.
Check whether the connection between the client and B315 is working properly.
If the client is connected to the B315 using a network cable, check whether the
LAN/WAN indicator is steady on or blinking.
If the client is connected to the B315 through Wi-Fi, go to the Wi-Fi connection
page to check the connection status.
3.
Check that the client is set to automatically obtain an IP address and DNS server
address.
What can I do if the B315 cannot access the Internet?
1.
Check whether the B315's power indicator is steady on. If not, power on the B315.
2.
Go to the B315's web management page to check the network status.
If no SIM card is detected, power off the B315 and disconnect the power
adapter, reinstall the SIM card and try again.
If PIN code is not verified, enter the PIN code as required, and try again.
If no network is available, move the B315 to an appropriate place, such as beside
the window, to get better signal, and try again.
If the dial-up connection failed, make sure the APN and account information are
correctly set, and try again.
3.
If the problem persists, contact your local Internet Service Provider (ISP).
Why am I unable to access Wi-Fi on a client?
1.
Check whether the B315's
indicator is steady on. If not, go to the B315's
web management page to enable the Wi-Fi function.
2.
Check whether the client is within the range of the B315. If not, adjust the
placement of the B315.
3.
Check whether the Wi-Fi password is correct. Note that the Wi-Fi password is case-
sensitive. The default password is printed on the label at the bottom of the B315.
To change the password, go to the web management page.
4.
Check whether your client's network adapter supports 802.11b/g/n. If not, the
client cannot connect to the B315.
5.
If the problem persists, restart your B315 or restore it to its factory settings. Note
that restoring your B315 will erase all your customized settings.
Page 13 / 20
11
6
For more help
If you are experiencing any issues with the B315:
Restart the B315.
See the help information on the web management page.
Restore the B315 to its factory settings.
Contact your service provider.
Please visit http://consumer.huawei.com/en/support/hotline for recently updated
hotline and email address in your country or region.
Figures in this guide are for your reference only. Specific models may vary slightly,
contact your service provider for more detailed information.
Page 14 / 20
12
7
Safety information
This section contains important information about the operation of your device. It
also contains information about how to use the device safely. Read this information
carefully before using your device.
Electronic device
Do not use your device if using the device is prohibited. Do not use the device if doing
so causes danger or interference with other electronic devices.
Interference with medical equipment
Follow rules and regulations set forth by hospitals and health care facilities. Do not
use your device where prohibited.
Some wireless devices may affect the performance of hearing aids or pacemakers.
Consult your service provider for more information.
Pacemaker manufacturers recommend that a minimum distance of 15 cm be
maintained between a device and a pacemaker to prevent potential interference
with the pacemaker. If using a pacemaker, hold the device on the side opposite the
pacemaker and do not carry the device in your front pocket.
Areas with flammables and explosives
Do not use the device where flammables or explosives are stored (in a gas station,
oil depot, or chemical plant, for example). Using your device in these environments
increases the risk of explosion or fire. In addition, follow the instructions indicated
in text or symbols.
Do not store or transport the device in containers with flammable liquids, gases, or
explosives.
Operating environment
Avoid dusty, damp, or dirty environments. Avoid magnetic fields. Using the device
in these environments may result in circuit malfunctions.
Before connecting and disconnecting cables, stop using the device and disconnect
it from the power supply. Ensure that your hands are dry during operation.
Place the device on a stable surface.
Keep the device away from electronic appliances that generate strong magnetic or
electric fields, such as a microwave oven or refrigerator.
During thunderstorms, power off your device and remove all cables connected to it
to protect against lightning strikes.
Do not use your device during thunderstorms to protect your device against any
danger caused by lightning.
Page 15 / 20
13
Ideal operating temperatures are 0°C to 40°C. Ideal storage temperatures are
-20°C to +70°C. Extreme heat or cold may damage your device or accessories.
Keep the device and accessories in a well-ventilated and cool area away from direct
sunlight. Do not enclose or cover your device with towels or other objects. Do not
place the device in a container with poor heat dissipation, such as a box or bag.
To protect your device or accessories from fire or electrical shock hazards, avoid
rain and moisture.
Keep the device away from sources of heat and fire, such as a heater, microwave
oven, stove, water heater, radiator, or candle.
Do not place any object, such as a candle or a water container, on the device. If
any foreign object or liquid enters the device, immediately stop using it, power it
off, and remove all cables connected to it. Then, contact an authorized service
center.
Do not block device openings. Reserve a minimum of 10 cm around the device to
dissipate heat.
Stop using your device or applications for a while if the device is overheated. If skin
is exposed to an overheated device for an extended period, low temperature burn
symptoms, such as red spots and darker pigmentation, may occur.
Do not touch the device's antenna. Otherwise, communication quality may be
reduced.
Do not allow children or pets to bite or suck the device or accessories. Doing so
may result in damage or explosion.
Observe local laws and regulations, and respect the privacy and legal rights of
others.
The device should be installed and operated with a minimum distance of 20 cm
between the device and your body.
Keep the device in a place with good reception. The distance between the device
and other metal materials (such as metal brackets or metal doors and windows)
should be greater than 25 cm and the distance between the devices should be
greater than 30 cm.
Child's safety
Comply with all precautions with regard to child's safety. Letting children play with
the device or its accessories may be dangerous. The device includes detachable
parts that may present a choking hazard. Keep away from children.
The device and its accessories are not intended for use by children. Children should
only use the device with adult supervision.
Accessories
Using an unapproved or incompatible power adapter, charger or battery may cause
fire, explosion or other hazards.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top