Page 46 / 111
Scroll up to view Page 41 - 45
Huawei Technologies Proprietary
36
Figure 4-4
RFC2684 Bridged Connection-application of Static
IP
z
IP Address
and
Subnet Mask:
enter the IP address and
subnet mask provided by ISP for the WAN interface of your
MT882.
z
Default Gateway:
enter the Gateway address provided by
ISP.
z
Default Route:
this setting specifying the IP address
above is used for default route of LAN. The data will be
sent through WAN interface whenever a client in LAN
accesses the Internet. The default setting of default route is
“Disabled”.
Page 47 / 111
Huawei Technologies Proprietary
37
III. DHCP
The setting page displayed below will appear if you select
DHCP
mode, which means you can automatically acquire IP address
from the DHCP sever of ISP.
Figure 4-5
RFC2684 Bridged Connection-application of DHCP
z
Default Route:
this setting will allow you to automatically
acquire IP address from the DHCP sever of ISP. The data
will be sent through WAN interface whenever a client LAN
computer accesses the Internet. The default setting of
default route is “Disabled”.
IV. Save
z
Click the
Apply
button to save the settings in the RAM.
z
To save these configuration changes permanently, enter
the
Tools>System Setting
page, and then click
Save &
Restart
button to save new settings.
Page 48 / 111
Huawei Technologies Proprietary
38
4.3.2
RFC2684 Routed Configuration
I. Configuration page
Figure 4-6
RFC2684 Routed (IPoA) Configuration
II. Parameters eaplanation
z
PVC:
the system provides 7 PVCs. Generally you can
leave this set at the default value 0. This option is also used
to create and configure new PVCs.
z
VPI:
if you need any modification, please enter the VPI
value provided by ISP. See the attached table for all the
VPI default values of PVCs.
z
VCI:
if you need any modification, please enter the VCI
value provided by ISP. See the attached table for all the
VCI default values of PVCs.
z
Encapsulation:
you can select the mode LLC or VC MUX.
Page 49 / 111
Huawei Technologies Proprietary
39
z
IP Address
and
Subnet Mask:
enter the IP address and
subnet mask provided by ISP for the WAN interface of your
MT882.
z
Default Route:
this setting specified the IP address below
is using for default route of LAN. The data will be sent
through WAN interface whenever a client LAN computer
accesses the Internet. The default setting of route is
“Disabled”, and the recommended setting is “Enabled”.
z
Default Gateway:
enter the Gateway address provided by
ISP.
III. Save
z
Click the
Apply
button to save the settings in the RAM.
z
To save these configuration changes permanently, enter
the
Tools>System Setting
page, and click
Save &
Restart
button to save new settings.
Page 50 / 111
Huawei Technologies Proprietary
40
4.3.3
PPP Configuration
I. Configuration page
Figure 4-7
PPP configuration
II. Parameter explanation
There are two options for PPP configuration: PPPoA and
PPPoE. The parameters that need to be configured are described as
below:
z
PVC:
the system provides 7 PVCs. Generally you can
leave this set at the default value 0. This option is also used
to create and configure new PVCs.
19216811.live