Page 51 / 111 Scroll up to view Page 46 - 50
Huawei Technologies Proprietary
41
z
VPI:
if you need any modification, please enter the VPI
value provided by ISP. See the attached table for all the
VPI default value of PVC.
z
VCI:
if you need any modification, please enter the VCI
value provided by ISP. See the attached table for all the
VCI default value of PVC.
z
Encapsulation:
you can select the mode LLC or VC MUX.
z
Default Route:
this setting specified the default IP address
of MT882 is using for default route of LAN.
z
Username
and
Password:
enter the username and
password provided by ISP.
z
Use DNS:
it is recommended to keep this option as
Enable,
indicating that when PPP dial applies for IP and gateway, it
also tries for DNS server IP at the same time. On the other
hand, keep this option as
disable,
indicating that obtaining
DNS server not from PPP dial, and needed to manually
type in the addresses of primary DNS server and
secondary DNS server on the DNS configuration page.
III. Save
z
Click the
Apply
button to save the settings in the RAM.
z
To save these configuration changes permanently, enter
the
Tools>System Setting
page, and click
Save &
Restart
button to save new settings.
4.4
DHCP Configuration
Click the
DHCP
of
Home
in the Wizard Column to set the DHCP
configuration. MT882 can be set as DHCP server.
Page 52 / 111
Huawei Technologies Proprietary
42
I. Configuration page
Figure 4-8
DHCP Configuration
II. Parameter explanation
z
DHCP Server:
choose
”Enable” to configure MT882 as
DHCP server of LAN. Then the ADSL Router shall provide
IP settings for your PC.
z
Starting/Ending IP Address:
enter the starting and
ending IP address that will be provided through DHCP
service.
z
Lease Time:
Select the lease time from the drop-down
menu. It will determine how long your PC can use the IP
address provided by DHCP server.
Page 53 / 111
Huawei Technologies Proprietary
43
III. Save
z
Click the
Apply
button to save the settings in the RAM. The
system will prompt you to reboot the device. The added
DHCP clients will be listed in the DHCP Client Table after
the device has been rebooted.
z
To save these configuration changes permanently, enter
the
Tools>System Setting
page, and click
Save &
Restart
button to save new settings.
4.5
DNS Configuration
Click the
DNS
of
Home
in the Wizard Column to set the DNS.
Multiple DNS addresses are useful to provide alternatives when one
of the servers is down or encountering heavy traffic. ISPs typically
provide primary and secondary DNS addresses, and may provide
additional addresses.
I. Configuration page
Figure 4-9
DNS Configuration
Page 54 / 111
Huawei Technologies Proprietary
44
II. Save
z
Click the
Apply
button to save the settings in the RAM.
z
To save these configuration changes permanently, enter
the
Tools>System Setting
page, and click
Save &
Restart
button to save new settings.
4.6
NAT Configuration
Network Address Translation (NAT) is a method for disguising
the private IP addresses on your LAN as the public IP address on the
Internet. You define NAT rules that specify exactly how and when to
translate between public and private IP addresses.
Click the
NAT
of
Home
in the Wizard Column to set the NAT.
NAT is enabled by default. You can enable or disable NAT by
selecting the
Enabled
or
Disabled
option in the configuration page
and applying the settings.
Page 55 / 111
Huawei Technologies Proprietary
45
I. Configuration page
Figure 4-10
NAT Configuration
II. Parameter explanation
The explanation of parameters in the above windows is as
below.
z
NAT:
select it to enable or disable the NAT. By default, it is
enabled.
z
UPNP Setting:
select it to enable or disable the UPNP
(Universal Play and Plug).
By default, it is enabled.
z
VPN Pass-Trough:
select it to enable or disable the VPN
Pass-through with PPTP protocol and IPSec protocol. By
default, it is enabled.
III. Save
z
Click the
Apply
button to save the settings in the RAM.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top