Huawei SmartAX-MT882 Router Manual PDF (Setup & Configuration Guide)

Page 41 / 111 Scroll up to view Page 36 - 40

Huawei Technologies Proprietary

31

4

Web-Based Management

In this chapter you will learn how to use the Web-based

management software to configure the MT882, which introduces the

significations of parameters and method of setting in the

configuration interface. The order of sectors is listed according to the

functional configuration interfaces.

4.1

Manager Interface Layout

The MT882 initially presents the

summary

page shown as

below when you first log in.

z

The left part of the page is wizard column, and you can

enter the Web page of configuration or management

through the hyperlink in wizard column.

z

The right part of the page is the practical domain of

configuration and management.

Page 42 / 111

Huawei Technologies Proprietary

32

Figure 4-1

GUI of Web-based configuration manager

Page 43 / 111

Huawei Technologies Proprietary

33

4.2

System View (Home Page)

Figure 4-2

Home Page – System View Display

The System View read-only table on the Home Page displays a

summary of various system settings and functions as described

below.

z

ADSL Line Status

: displays the ADSL State, Data Path,

DSP version, Operation Mode, and the status of Upstream

and Downstream of the ADSL line.

Page 44 / 111

Huawei Technologies Proprietary

34

z

WAN Channel

: displays the names and settings for the

device

WAN

interfaces.

Multiple

software-defined

interfaces may be configured to use the DSL connection.

The PVC number, gateway, IP address, mask, VPI/VCI,

encapsulation and status will be displayed in the WAN

interface.

z

LAN Channel

: displays the names and various settings of

LAN interface, which include MAC address, IP address,

Mask, speed, duplex and status.

4.3

WAN Setting

Click the

WAN Setting

of

Home

in the wizard column to carry

out the WAN Setting. WAN Setting includes three modes: RFC2684

Bridged, RFC2684 Routed and PPP.

4.3.1

RFC2684 Bridged Connection

Bridged connections include three modes: Pure Bridge, Static

Bridge and DHCP.

z

PVC:

system provides 7 PVCs. Generally you can keep

the default value 0. This option is also used to create and

configure new PVCs.

z

VPI:

if you need any modification, please enter the VPI

value provided by ISP. See the attached table for all the

VPI default values of PVC.

z

VCI:

if you need any modification, please enter the VCI

value provided by ISP. See the attached table for all the

VCI default value of PVC.

z

Encapsulation:

you can select LLC or VC MUX.

Page 45 / 111

Huawei Technologies Proprietary

35

I. Pure Bridge

The setting page displayed as below will appear while you

choose

Pure Bridged

mode. The gray item means it can be

operated without any configuration.

Figure 4-3

RFC2684 Bridged Connection-Application of Pure

Bridge

II. Static IP

The setting page displayed as below will appear while you

select

Static IP

setting mode. Please fill the corresponding field with

the IP address and network mask provided by ISP. The default

setting of route is “Disabled”, and the Gateway IP address is null.

The recommended setting is to enable default route and enter the

Gateway IP address provided by ISP.

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share