Page 56 / 111
Scroll up to view Page 51 - 55
Huawei Technologies Proprietary
46
z
To save these configuration changes permanently, enter
the
Tools>System Setting
page, and click
Save &
Restart
button to save new settings.
4.7
Static Route
Click the
Static Route
of
Home
in the Wizard Column to set the
static route for connection.
Use Static Routing to specify a route
used for data traffic within your Ethernet LAN or to route data on the
WAN. This is used to specify that all packets destined for a particular
network or subnet using a predetermined gateway.
I. Configuration page
Figure 4-11
Static Route Configuration
II. Parameter explanation
The explanation of parameters in the above windows is as
below.
Page 57 / 111
Huawei Technologies Proprietary
47
z
Destination IP Address
and
Subnet Mask:
enter the
destination IP address and subnet mask provided by ISP
for the WAN interface of your MT882.
z
Default Gateway:
enter the gateway address provided by
ISP. The data is forwarded to the destination through the
gateway you set. Or you can choose an
Interface Name
to
route data traffic.
z
Interface Name:
check this option to select an interface
name from the drop-down list to replace the default
gateway. The generation of the interface depends on how
you set the PVCs.
III. Save
z
Click the
Apply
button to save the settings in the RAM.
z
To save these configuration changes permanently, enter
the
Tools>System Setting
page, and click
Save &
Restart
button to save new settings.
4.8
LAN Setting
Click the
LAN Setting
of
Advanced
in the Wizard Column to
set the LAN interface. The LAN IP address identifies the LAN port
(eth-0) as a node on your network; that is, its LAN IP address must
be in the same subnet as the computers in your LAN.
You can change the default LAN IP address and Net Mask to
suit for your LAN.
Page 58 / 111
Huawei Technologies Proprietary
48
I. Configuration page
Figure 4-12
LAN Configuration
II. Parameter explanation
z
IP Address:
type in the IP address for the Ethernet LAN
interface. The default IP address is 192.168.1.1
z
Subnet Mask:
type in the Subnet Mask for the Ethernet
LAN IP interface. The default mask is 255.255.255.0
z
Local Domain Name:
enter the local domain name if it
exists.
±
Note:
The public IP address that ISP assigned is not LAN IP address. The
public IP address identifies the WAN interface that the ADSL router
connects to Internet.
Page 59 / 111
Huawei Technologies Proprietary
49
III. Save
z
Click the
Apply
button to save the settings in the RAM.
z
To save these configuration changes permanently, enter
the
Tools>System Setting
page, and click
Save &
Restart
button to save new settings.
±
Note:
If you change the IP address, you need login again.
4.9
Virtual Server
Click the
Virtual Server
of
Advanced
in the Wizard Column to
set the virtual server. A Virtual Server can allow remote users to
access services to PCs on your LAN such as FTP for file transfers or
SMTP and POP3 for e-mail.
The MT882 will accept remote requests
for these services at your Global IP Address (the one assigned to
your account by your ISP), using the specified TCP or UDP protocol
and port number, and then redirect these requests to the server on
your LAN with the Private IP address you specify
Page 60 / 111
Huawei Technologies Proprietary
50
I. Configuration page
Figure 4-13
Virtual Server Configuration
II. Parameter explanation
z
Status:
select it to enable virtual server or not, the default
is “Enabled”.
z
Name:
enter the name of the virtual server to be added.
Click
Clear
button to delete the entered server name.
z
Private IP:
enter the IP address of local PC providing the
service of virtual server.
z
Protocol Type:
select the protocol to be applied. User can
select a protocol from TCP and UDP, or both.
19216811.live