Huawei SmartAX-MT882 Router Manual PDF (Setup & Configuration Guide)

Page 76 / 111 Scroll up to view Page 71 - 75

Huawei Technologies Proprietary

66

RIP can be enabled on any existing WAN or LAN interfaces. It

may be specified to receive RIP requests and reply to them, and it

can be specified to send RIP queries, or to both receive and send

RIP packets. Furthermore, the RIP version can be specified. The

table below lists the parameters that can be specified for the

pull-down RIP menus. Click the

Apply

button to set up RIP as

specified.

II. Parameter explanation

z

Interface Name:

it shows the interface on which you want

to share routing table information with other routing

devices.

z

RIP 1 Received:

select it to enable or disable receiving

route information using RIP v1.

z

RIP 1 send:

select it to enable or disable sending route

information using RIP v1.

z

RIP 2 Received:

select it to enable or disable receiving

route information using RIP v2.

z

RIP 2 send:

select it to enable or disable sending route

information using RIP v2.

z

Send MultiCast:

select it to enable or disable sending

route information using MultiCast.

III. Save

z

Click the

Submit

button to save the settings in the RAM.

z

To save these configuration changes permanently,

Tools>System Setting

page, and click

Save & Restart

button to save new settings.

Page 77 / 111

Huawei Technologies Proprietary

67

4.14

Administrator Setting

Click the

Administrator Setting

of

Tools

in the Wizard Column

to set the rules of firewall.

Administrator

has read/write ability on the

Web page and can make some changes. You can change the Admin

account password here for personal security.

I. Configuration page

Figure 4-21

Administrator Setting

Page 78 / 111

Huawei Technologies Proprietary

68

±

Note:

It is recommended to keep a record of the new password after

modified.

II. Parameter explanation

z

Administrator Setting:

to change the password used to

access the MT882 Web manager, Type the

New

Password

and

Confirm Password

to be certain you have

typed it correctly. Click the

Apply

button to activate the

new password.

z

Block WAN Ping:

pinging public WAN IP addresses is a

common method used by hackers to test whether your

WAN IP address is valid. If you want to avoid hackers

testing your WAN IP, click

Enabled

to activate this

function.

z

Remote Management:

remote Management allows the

device to be configured through the WAN (Wide Area

Network) port from the Internet using a Web browser. A

username and password are still required to access the

browser-based management interface.

z

IP Address

- enter the Internet IP address of the

computer connected to the MT882. If the IP address is

set to *, this allows all Internet IP addresses to access

the ADSL Router.

z

Port

- the port number is used to access the MT882.

Page 79 / 111

Huawei Technologies Proprietary

69

III. Save

z

Click the

Apply

button to save the settings in the RAM.

z

To save these configuration changes permanently, enter

the

Tools>System Setting

page, and click

Save &

Restart

button to save new settings.

4.15

Time

Click the

Time

of

Tools

in the Wizard Column to set the system

time. The "system time" is used by the unit to synchronize scheduling

services and system login activities. You will need to set the time

zone corresponding to your location. The time can be set manually or

the device can connect to a Network Time Protocol ( NTP ) server to

retrieve the time.

I. Configuration page

Figure 4-22

System Time Setting

Page 80 / 111

Huawei Technologies Proprietary

70

II. Save

z

Click the

Submit

button to save the settings in the RAM.

z

To save these configuration changes permanently, enter

the

Tools>System Setting

page, and click

Save &

Restart

button to save new settings.

4.16

System Setting

Click the

System Setting

of

Tools

in the Wizard Column to

configure the setting of system.

I. Configuration page

Figure 4-23

System Setting

II. Parameter explanation

z

Save:

when clicking on

Save

, The current system settings

can be saved as a file onto the local hard drive. The file will

be saved as

adslmodem.cfg

.

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share