Page 81 / 111
Scroll up to view Page 76 - 80
Huawei Technologies Proprietary
71
z
Browse
and
Load:
the saved file or any other saved
setting file created by device can be uploaded into the unit.
To reload a system setting file, click on
Browse
to search
the local hard drive for the file to be used, and then click on
Load
to start loading the file.
z
Restore:
the device can also be reset back to factory
default settings by clicking
Restore
. Use the restore
feature only if necessary. This will erase previously saved
settings for the unit.
z
Save & Restart
: you can save the new settings to
permanent storage by clicking
Save & Restart
. This will
put into effect any configuration changes that have been
successfully saved to flash memory.
Caution:
Do not reboot the device using the Reset button on the back panel of
the MT882 to activate new changes. This button resets the device
settings to the manufacturer’s default values. Any custom settings
will be lost.
4.17
Firmware Upgrade
Click the hyperlink
Firmware Upgrade
in the Wizard column to
open the
Firmware Upgrade
page and update the system software.
Page 82 / 111
Huawei Technologies Proprietary
72
Figure 4-24
Firmware Upgrade
Upgrade File:
type in the full path and file name of the firmware
file to be uploaded. Alternatively you may click the Browse
button
to
search for the file on your system.
When the file names have been entered, click the
Upload
button to start loading the firmware file. If the upload is successful, a
message informs you that it was successfully loaded. If the firmware
does not load, an error message informs you to try the upload again.
Check the file names and attempt to upload again. If the file still is not
loaded, reboot the device and try again.
Caution:
Do not power off the MT882 during the firmware upgrade process.
Otherwise, the configuration in the flash could be damaged.
Page 83 / 111
Huawei Technologies Proprietary
73
4.18
Log
Click the
Log
of
Status
in the Wizard Column to view the log of
device.
4.18.1
View Log
The log file keeps records of the events and activities occurring
on the device. It can display up to 200 events. The latest activities will
overwrite the outdated ones. You may want to save the log files by
clicking on
Log Setting
. When the device is rebooted, the logs are
automatically cleared.
I. Configuration page
Figure 4-25
View Log
II. Buttons e]xplanation
z
First:
the first page of the log
z
Last:
the last page of the log
z
Previous:
,moves back one log page.
z
Next:
moves forward one log page.
z
Clear:
clears the logs completely.
z
Log Settings:
brings up the page to configure the logs.
Page 84 / 111
Huawei Technologies Proprietary
74
4.18.2
Log Settings
Not only does the device display the logs of activities and
events, it can be setup to send these logs to another location. The
logs can be sent through email to a specific email account.
I. Configuration page
Figure 4-26
Log Setting
II. Buttons explanation
z
Server IP Status:
select it to enable or disable sending the
logs.
z
SMTP Server:
the address of the SMTP (Simple Mail
Transfer Protocol) server that will be used to send the logs.
z
Log Type:
select the type of activities that you want the
ADSL Router to keep records.
Page 85 / 111
Huawei Technologies Proprietary
75
4.18.3
Save
z
Click the
Apply
button to save the settings in the RAM.
z
To save these configuration changes permanently, enter
the
Tools>System Setting
page, and click
Save &
Restart
button to save new settings.
4.19
Diagnostics
The diagnostics feature executes a series of test of your system
software and hardware connections. Use this feature when working
with your ISP to troubleshoot problems. Click the
Diagnostics
of
Status
in the Wizard Column to perform the basic diagnostics for
system.
19216811.live