Page 91 / 111
Scroll up to view Page 86 - 90
Huawei Technologies Proprietary
81
5.3
PPPoA Configuration
Configurations on MT882
Location
Parameters
Comments
PVC
Select any one from the eight
PVCs.
VPI/VCI
The value shall be provided by
your ISP.
Encapsulation
The value shall be provided by
your ISP. Usually you can keep
the default value: LLC.
Wan Type
Select “PPP”.
Connection
Type
Select “PPPoA”.
User name
and Password
The values shall be provided by
your ISP.
Default Route
Select “Enable”.
ATM Setting
DNS
Select “Enable”.
Configurations on MT882
NAT
It is recommended to enable the function of NAT.
DNS
It is recommended to have DNS Relay function
enabled.
DHCP Mode
It is recommended to have DHCP Server function
enabled.
Configurations on the user
’s
PC
Page 92 / 111
Huawei Technologies Proprietary
82
Configurations on MT882
Location
Parameters
Comments
IP Address
and Network
Mask
It is recommended to set the mode as obtaining
an IP address automatically.
DNS
It is recommended to set the mode as obtaining a
DNS server’s IP address automatically.
5.4
RFC 2684 Bridged (Pure Bridge)
Configuration
Configurations on MT882
Location
Parameters
Comments
PVC
Select any one from the eight
PVCs.
VPI/VCI
The value shall be provided by
your ISP.
Encapsulation
The value shall be provided by
your ISP. Usually you can keep
the default value: LLC.
Wan Type
Select “RFC2684 Bridged”.
ATM Setting
Connection
Type
Select “Pure Bridge”.
Configurations on the user PC
PPPoE
Dial–up
Application
Before connecting to the Internet, the user shall
have PPPoE dial–up application installed on the
PC.
Page 93 / 111
Huawei Technologies Proprietary
83
5.5
RFC 2684 Bridged (Static IP)
Configuration
Configurations on MT882
Location
Parameters
Comments
PVC
Select any one from the eight
PVCs.
VPI/VCI
The value shall be provided by
your ISP.
Encapsulation
The value shall be provided by
your ISP. Usually you can keep
the default value: LLC.
Wan Type
Select “RFC2684 Bridged”.
Connection
Type
Select “Static IP”.
IP Address
and Subnet
Mast
The values shall be provided by
your ISP.
Default Route
Select “Enable”.
ATM Setting
Gateway IP
Address
The value shall be provided by
your ISP.
NAT
It is recommended to enable the function of NAT.
DNS
It is recommended to have DNS Relay function
enabled.
And set DNS IP address provided by your ISP.
DHCP Mode
It is recommended to have DHCP Server function
enabled.
Page 94 / 111
Huawei Technologies Proprietary
84
Configurations on the user PC
IP Address
and Network
Mask
It is recommended to set the mode as obtaining an
IP address automatically.
DNS
It is recommended to set the mode as obtaining a
DNS server’s IP address automatically.
5.6
RFC 2684 Bridged (DHCP) Configuration
Configurations on MT882
Location
Parameters
Comments
PVC
Select any one from the eight
PVCs.
VPI/VCI
The value shall be provided by
your ISP.
Encapsulation
The value shall be provided by
your ISP. Usually you can keep
the default value: LLC.
Wan Type
Select “RFC2684 Bridged”.
Connection
Type
Select “DHCP”.
ATM Setting
Default Route
Select “Enable”.
NAT
It is recommended to enable the function of NAT.
DNS
It is recommended to have DNS Relay function
enabled.
And set DNS IP address provided by your ISP.
Page 95 / 111
Huawei Technologies Proprietary
85
Configurations on MT882
Location
Parameters
Comments
DHCP Mode
It is recommended to have DHCP Server function
enabled.
Configurations on the user PC
IP Address
and Network
Mask
It is recommended to set the mode as obtaining an
IP address automatically.
DNS
It is recommended to set the mode as obtaining a
DNS server’s IP address automatically.
5.7
RFC 2684 Route (IPoA) Configuration
Configurations on MT882
Location
Parameters
Comments
PVC
Select any one from the eight
PVCs.
VPI/VCI
The value shall be provided by
your ISP.
Encapsulation
The value shall be provided by
your ISP. Usually you can keep
the default value: LLC.
Wan Type
Select “RFC2684 Routed
(IPoA)”.
ATM Setting
IP Address
and Subnet
Mast
The values shall be provided by
your ISP.
19216811.live