Page 106 / 111 Scroll up to view Page 101 - 105
Huawei Technologies Proprietary
96
8.2
FCC
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning equipment off and on,
the user is encouraged to try to correct the interference by one or
more of the following measures:
z
Reorient or relocate the receiving antenna.
z
Increase the separation between the equipment and
receiver.
z
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
z
Consult the dealer or an experienced radio/TV technician
for help.
This equipment complies with Part 68 of the Federal
Communications Commission (FCC) rules and regulations published
Page 107 / 111
Huawei Technologies Proprietary
97
by the industry’s Administrative Council for Terminal Attachments
(ACTC). On the
Location, such as rear clip
of this equipment is a
label that contains, among other information, the FCC registration
number and Ringer Equivalence Number (REN) for this equipment. If
requested, provide the information to the telephone company.
Registration Jack USOC: RJ-45
RJ-11
USB (Type B)
The telephone cord and modular provided with this equipment
is compliant with the criteria of the telecommunication industry. This
equipment is designed for connection to the telephone network or
premises wiring using a compatible modular jack that is also
compliant.
The REN is used to determine the quantity of devices which
may be connected to the telephone line. Excessive RENs on a
telephone line may result in the devices not ringing in response to an
incoming call. In most but not all areas, the sum of the RENs should
not exceed five (5.0). To be certain of the number of the devices that
may be connected to a line, as determined by the total RENs, contact
the local telephone company. The REN for this product may be
printed on the product label or part of the product identifier that has
the format US:AAAEQ##TXXXX. The digits represented by ## are
the REN without a decimal point (e.g., 03 is a RN of 0.3).
If the terminal equipment (ADSL device) causes harm to the
telephone network, the telephone company will notify you in advance
that temporary discontinuance of service may be required. However,
Page 108 / 111
Huawei Technologies Proprietary
98
if advance notice isn’t practical, the telephone company will notify the
customer as soon as possible. In addition, you will be advised of your
right to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities,
equipment, operations or procedures that could affect the operation
of the equipment. If this happens, the telephone company will
provide advance notice in order for you to make necessary
modifications to maintain uninterrupted service. If trouble is
experienced with the (ADSL device), please contact
Huawei
Technologies Co., Ltd.
XXXXXX(phone number) for repair or
warranty information.
If the equipment is causing harm to the telephone network, the
telephone company may request that you disconnect the equipment
until the problem is resolved.
The customers can make some simple repairs, such as replace
fuses, plug in cards, etc.
Connection to party line service is subject to state tariffs.
Contact the state public utility commission, public service
commission or corporation commission for information.
If your home has specially wired alarm equipment connected to
the telephone line, ensure the installation of this equipment does not
disable alarm equipment; consult your telephone company or a
qualified installer.
If this equipment has a telephone receiver, it is hearing aid
compatible.
Page 109 / 111
Huawei Technologies Proprietary
99
8.3
Abbreviations
Abbreviation
Description
ADSL
Asymmetric Digital Subscriber Line
ATM
Asynchronous Transfer Mode
DHCP
Dynamic Host Configuration Protocol
DNS
Domain Name Server
DSLAM
Digital Subscriber Line Access Multiplex
HTML
Hypertext Markup Language
IP
Internet Protocols
ICMP
Internet Control Message Protocol
IPoA
Internet Protocols Over ATM
ISP
Internet Service Provider
LAN
Local Area Network
MA
Media Access Module
MAC
Media Access Control
MIB
Management Information Base
NIC
Network Interface Card
NMS
Network Management Station
PPP
Point to Point Protocol
PPPoA
PPP over ATM
PPPoE
PPP over Ethernet
PVC
Permanent Virtual Connection
RAM
Random Access Memory
Page 110 / 111
Huawei Technologies Proprietary
100
Abbreviation
Description
RIP
Routing Information Protocol
SNMP
Simple Network Management Protocol
TCP
Transfer Control Protocol
TFTP
Trivial File Transfer Protocol
UDP
User Datagram Protocol
VCI
Virtual Channel Identifier
VPI
Virtual Path Identifier
WAN
Wide Area Network

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top