Parameter
Data
Description
Mode of
obtaining an IP
address
PPPoE
l
User name:
iadtest@pppoe
l
Password:
iadtest
There are three modes to obtain an IP address:
l
DHCP: Obtain an IP address dynamically.
l
Static: Configure an IP address manually.
l
PPPoE: Access in the PPPoE dialup mode.
In this example, the PPPoE mode is selected. You
can also choose the DHCP or static mode according
to the data plan of the upper-layer network. When
the PPPoE mode is selected, the configured user
name and password must be the same as those
planned on the BRAS.
802.1p
1
The larger the priority value, the higher the priority.
The priorities are the same as those planned on the
OLT, that is, the priority sequence is the voice
service, multicast service, and Internet access
service/Wi-Fi in a descending order.
NAT function
Enable
Enable the network address translation (NAT)
function.
Port binding
LAN2
The WAN interface is bound to port LAN2
connected to the PC. The PC can access the
Internet.
DHCP function
Enable
The PC connected to port LAN2 obtains an IP
address from the DHCP address pool configured
on the ONT. By default, the DHCP function is
enabled and need not be configured.
4.4.2 Configuration Flowchart
This topic shows the flowchart for configuring the L3 Internet access service.
Figure 4-32
shows the flowchart for configuring the L3 Internet access service through the Web
page.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4 Service Configuration Examples
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-45