Prerequisite
l
ONT must be added or auto-discovered on the OLT and associated service streams must
be configured on the OLT. For details, see
4.2.1 Commissioning the Interoperation
Between OLT and ONT (Through CLI of the OLT)
or
4.2.2 Commissioning the
Interoperation Between OLT and ONT (Through the NMS)
.
l
ONT must be auto-discovered on the TR-069 server. For details, see
4.2.3 Commissioning
Interoperation Between the TR-069 Server and the ONT Through the Web Page
or
4.2.4 Commissioning Interoperation Between the TR-069 Server and the ONT
Through the NMS
.
l
A PC is connected to port LAN2 on the ONT. The IP address of the PC is allocated by the
DHCP server (the ONT). PPPoE dialup is performed on the ONT to implement the L3
Internet access service of the PC.
Context
l
This topic describes how to configure only L3 Internet access service. For L2 Internet access
service, configuration is not required on the ONT but on the OLT. For details, see
4.2.1
Commissioning the Interoperation Between OLT and ONT (Through CLI of the
OLT)
or
4.2.2 Commissioning the Interoperation Between OLT and ONT (Through
the NMS)
.
l
Every data change must be saved. You can click
Save
in a window to save data changes.
If you navigate to another node without saving data changes, a dialog box will be displayed
prompting you to save the data changes. In this case, click
YES
in the dialog box. New
data will be automatically applied to the ONTs after the data changes are saved.
CAUTION
When configuring services on the TR-069 server, do not modify the WAN interface connecting
the TR-069 server and the ONT. Otherwise, the TR-069 server loses communication with the
ONT.
Procedure
Step 1
Log in to the TR-069 server and choose
Subnet View
>
TR069 Subnet
from the navigation
tree. In the terminal list, right-click an ONT and choose
Tools
>
Configure in Real Time
from
the shortcut menu.
Step 2
In the
Configure in Real Time
dialog box, set
Root Node
to
Internet gateway device
.
Step 3
Configure the working mode of a LAN port.
Choose
InternetGatewayDevice
>
LANDevice
>
1
>
LANEthernetInterfaceConfig
>
2
from
the navigation tree. In the right pane, set
X_HW_L3Enable
to
1
, indicating that port LAN2
works in the L3 mode.
Figure 4-44
shows how to configure the working mode of a LAN port.
4 Service Configuration Examples
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4-56
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)