Page 146 / 232 Scroll up to view Page 141 - 145
The SIP-based voice service can be configured through the Web page, N2000 BMS, or TR-069
server.
4.5.1 Data Plan
This topic provides the typical data plan for configuring the SIP-based voice service to make
good preparations for the configuration.
Table 4-7
provides the data plan for configuring the SIP-based voice service.
Table 4-7
Data plan for configuring the SIP-based voice service
Parameter
Data
Description
Service type of
the WAN
interface
VoIP
When configuring the voice service, you just need to
select VoIP or a combination with VoIP. In this
example, VoIP is selected.
Connection
mode
Route
It can be set to route and bridge. In the case of the
voice service, only route can be selected.
VLAN ID of the
WAN interface
200
The VLAN ID of the WAN interface must be the
same as the VLAN ID of the traffic streams
configured on the OLT.
Mode of
obtaining an IP
address
DHCP
There are three modes of obtaining an IP address.
l
DHCP: Obtain an IP address dynamically.
l
Static: Configure an IP address manually.
l
PPPoE: Access in the PPPoE dialup mode.
In this example, the DHCP mode is configured. You
can also select the static or PPPoE mode according
to the data plan of the upper-layer network.
802.1p
6
The larger the service priority value, the higher the
service priority. The priorities are the same as those
planned on the OLT, that is, the priority sequence is
the voice service, multicast service, and Internet
access service/Wi-Fi in a descending order.
Region
China
-
Signaling
protocol
SIP
l
Device software version V100R002C00 supports
the SIP protocol.
l
Device software version V100R002C01 supports
the H.248 protocol.
For the SIP voice service, load V100R002C00
software version if the available software version is
not V100R002C00.
This item need not be configured on the Web page.
If the software version is V100R002C00, only the
page about SIP voice parameters is displayed; if the
software version is V100R002C01, only the page
about H.248 voice parameters is displayed.
4 Service Configuration Examples
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4-60
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)
Page 147 / 232
Parameter
Data
Description
IP address of the
SIP server
172.23.1.2
The IP address of the SIP server must be the same as
the IP address configured on the softswitch.
Domain name
for SIP
registration
softx3000.huawei.
com
The registration domain name must be the same as
the registration domain name configured on the
softswitch.
Telephone
number and
password of SIP
users
l
User 1:
telephone
number
88001234
(77770085);
password
iadtest1.
l
User 2:
telephone
number
88001235
(77770086);
password
iadtest2.
The telephone numbers must be the same as those
set on the softswitch.
SIP digitmap
8800xxxx
7777xxxx(For
web configure)
Indicates that the eight-digit telephone numbers
starting with
8800
are allowed to have voice
services. This parameter must be consistent with the
CO data plan in a specific country/region.
4.5.2 Configuration Flowchart
This topic provides the flowchart for configuring the SIP-based voice service.
Figure 4-47
shows the flowchart for configuring the SIP-based voice service through the Web
page.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4 Service Configuration Examples
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-61
Page 148 / 232
Figure 4-47
Flowchart for configuring the SIP-based voice service through the Web page
Figure 4-48
shows the flowchart for configuring the SIP-based voice service through the N2000
BMS.
4 Service Configuration Examples
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4-62
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)
Page 149 / 232
Figure 4-48
Flowchart for configuring the SIP-based voice service through the N2000 BMS
Figure 4-49
shows the flowchart for configuring the SIP-based voice service through the TR-069
server.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4 Service Configuration Examples
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-63
Page 150 / 232
Figure 4-49
Flowchart for configuring the SIP-based voice service through the TR-069 server
4.5.3 Configuration Method
The SIP-based voice service can be configured through the Web page, N2000 BMS, or TR-069
server.
Configuring SIP-based Voice Service Through the Web Page
This topic provides an example of how to configure the SIP-based voice service through the
Web page.
Prerequisite
l
ONT must be added or auto-discovered on the OLT and associated service streams must
be configured on the OLT. For details, see
4.2.1 Commissioning the Interoperation
Between OLT and ONT (Through CLI of the OLT)
or
4.2.2 Commissioning the
Interoperation Between OLT and ONT (Through the NMS)
.
l
The environment for service configuration on the Web page must be available and you
must be logged into the Web page successfully. For details, see
3.2 Logging In Through
the Web Page
.
l
Two telephone sets are connected to TEL1 and TEL2 on the ONT respectively.
Procedure
Step 1
Configure the parameters of the voice WAN interface.
4 Service Configuration Examples
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4-64
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top