Page 151 / 232 Scroll up to view Page 146 - 150
1.
Coose
WAN
>
WAN Configuration
.
2.
In the pane on the right, click
New
. In the dialog box that is displayed, configure the
parameters of the WAN interface as follows:
l
Select
Enable
next to
NewWanConnction
to enable the WAN connection that is newly
set up.
l
Set
Service List
to
VOIP
.
l
Set
Mode
to
Route
.
l
Set
VLAN ID
to
200
.
l
Set
802.1p
to
6
.
l
Set
IP Acquisition Mode
to
DHCP
.
Figure 4-50
shows how to configure the parameters of the voice WAN interface.
Figure 4-50
Configuring the parameters of the voice WAN interface through the Web page
3.
Click
Apply
.
Step 2
Configure the parameters of the SIP-based voice interface.
1.
In the navigation tree on the left, choose
Voice
>
VoIP Interface Configuration
.
2.
In the pane on the right, configure the parameters of the SIP-based voice interface as
follows:
l
Set
Proxy Server Address
below
Primary Server
to
172.23.1.2
.
l
Set
Home Domain
to
softx3000.huawei.com
.
l
Set
Digitmap
to
7700xxxx
.
l
Set
Region
to
CN - China
.
l
Set
Signaling Port Name
to
1_VOIP_R_VID_200
.
Figure 4-51
shows how to configure the parameters of the SIP-based voice interface.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4 Service Configuration Examples
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-65
Page 152 / 232
Figure 4-51
Configuring the parameters of the SIP-based voice interface through the Web page
3.
Click
Apply
.
Step 3
Configure the parameters of the SIP-based voice users.
1.
In the navigation tree on the left, choose
Voice
>
VoIP User Configuration
.
2.
In the pane on the right, configure the parameters of voice user 1 as follows:
l
Set
Public User Name
to
77770085
.
l
Select
Enable
to enable the voice user configuration.
l
Set
Password
to
iadtest1
.
l
Set
Associated POTS
to
1
.
In the pane on the right, click
New
to add voice user 2, and configure the parameters of
voice user 2 as follows:
l
Set
Public User Name
to
77770086
.
l
Select
Enable
to enable the voice user configuration.
l
Set
Password
to
iadtest2
.
l
Set
Associated POTS
to
2
.
Figure 4-52
shows how to configure the parameters of voice user 2.
4 Service Configuration Examples
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4-66
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)
Page 153 / 232
Figure 4-52
Configuring the parameters of the SIP-based voice user 2 through the Web page
3.
Click
Apply
.
Step 4
Save the configuration.
Choose
System Tools
>
Configuration File
from the navigation tree. In the right pane, click
Save Configuration
, as shown in
Figure 4-53
.
Figure 4-53
Saving the configuration
Step 5
Restart the voice process.
In the navigation tree on the left, choose
Status
>
VoIP Information
. In the pane on the right,
click
Restart VoIP
, as shown in
Figure 4-54
.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4 Service Configuration Examples
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-67
Page 154 / 232
Figure 4-54
Restarting the voice process
----End
Result
1.
Query the connection status of the ONT.
In the navigation tree on the left, choose
Status
>
WAN Information
. In the pane on the
right, the
Status
is
Connected
and the obtained IP address is displayed in
IP
.
Figure 4-55
shows how to query the connection status of voice service.
Figure 4-55
Querying connection status of voice service
2.
Query the registration status of the voice user.
In the navigation tree on the left, choose
Status
>
VoIP Information
. In the pane on the
right, the
User Status
is
Up
.
Figure 4-56
shows how to query the registration status of voice user.
4 Service Configuration Examples
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4-68
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)
Page 155 / 232
Figure 4-56
Querying the registration status of voice user
3.
Verify the service.
User 1 with telephone number
77770086
can call user 2 with telephone number
77770086
, and the communication between them is normal. The same is true when user 2
calls user 1.
Configuring SIP-based Voice Service Through the NMS
This topic provides an example of how to configure the SIP-based voice service through the
NMS.
Prerequisite
l
ONT must be added or auto-discovered on the OLT and associated service streams must
be configured on the OLT. For details, see
4.2.1 Commissioning the Interoperation
Between OLT and ONT (Through CLI of the OLT)
or
4.2.2 Commissioning the
Interoperation Between OLT and ONT (Through the NMS)
.
l
Two telephone sets are connected to TEL1 and TEL2 on the ONT respectively.
Context
l
The procedures for configuring the HG8240, HG8247, and HG8245 are the same. This
topic considers the HG8245 as an example to describe how to configure the ONT.
l
The following section considers the creation of an ONT VAS profile as an example to
describe how to bulk configure ONTs. To configure a single ONT, right-click the ONT on
the GPON ONU tab page, and choose
Configure Value-Added Service
from the shortcut
menu. Details will not be provided in this topic.
Procedure
Step 1
Choose
Profile
>
ONT VAS Profile
from the main menu.
Step 2
Right-click and choose
Add
from the shortcut menu.
Step 3
In the dialog box that is displayed, set
Profile Name
,
Vendor ID
,
Terminal Type
, and
Version
. Where,
Version
must be set to
V1R002C00-Later
.
Figure 4-57
shows how to create an ONT VAS profile.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4 Service Configuration Examples
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-69

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top