Parameter
Data
Description
Signaling
protocol
H.248
l
Device software version V100R002C00
supports the SIP protocol.
l
Device software version V100R002C01
supports the H.248 protocol.
For the SIP voice service, load V100R002C01
software version if the available software
version is not V100R002C01.
This item need not be configured on the Web
page. If the software version is V100R002C00,
only the page about SIP voice parameters is
displayed; if the software version is
V100R002C01, only the page about H.248
voice parameters is displayed.
IP address of the
MGC server
172.23.1.2
The IP address of the MGC server must be the
same as the IP address configured on the MGC.
MG registration
mode
Domain name
The MG registration mode must be the same as
the mode configured on the MGC. There are
three registration modes: domain name, IP
address, and device name.
Domain name
for MG
registration
user.huawei.com
The domain name for MG registration must be
the same as the registration domain name
configured on the MGC.
Termination ID
l
Line 1 termination
ID: A0;
corresponding
telephone number:
88001234
l
Line 2 termination
ID: A1;
corresponding
telephone number:
88001235
The termination IDs of line 1 and line 2
configured on the MGC correspond to
telephone numbers
88001234
and
88001235
respectively.
4.6.2 Configuration Flowchart
This topic provides the flowchart for configuring the H.248-based voice service.
Figure 4-74
shows the flowchart for configuring the H.248-based voice service through the Web
page.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4 Service Configuration Examples
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-89