Huawei HG8245H Orange Router Manual PDF (Setup & Configuration Guide)

Page 176 / 232 Scroll up to view Page 171 - 175

Figure 4-74

Flowchart for configuring the H.248-based voice service through the Web page

Figure 4-75

shows the flowchart for configuring the H.248-based voice service through the

N2000 BMS.

4 Service Configuration Examples

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4-90

Huawei Proprietary and Confidential

Issue 02 (2011-01-26)

Page 177 / 232

Figure 4-75

Flowchart for configuring the H.248-based voice service through the N2000 BMS

Figure 4-76

shows the flowchart for configuring the H.248-based voice service through the

TR-069 server.

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4 Service Configuration Examples

Issue 02 (2011-01-26)

Huawei Proprietary and Confidential

4-91

Page 178 / 232

Figure 4-76

Flowchart for configuring the H.248-based voice service through the TR-069 server

4.6.3 Configuration Method

The H.248-based voice service can be configured through the Web page, N2000 BMS, or TR-069

server.

Configuring the H.248-based Voice Service Through the Web Page

This topic provides an example of how to configure the H.248-based voice service through the

Web page.

Prerequisite

l

ONT must be added or auto-discovered on the OLT and associated service streams must

be configured on the OLT. For details, see

4.2.1 Commissioning the Interoperation

Between OLT and ONT (Through CLI of the OLT)

or

4.2.2 Commissioning the

Interoperation Between OLT and ONT (Through the NMS)

.

l

The environment for service configuration on the Web page must be available and you

must be logged into the Web page successfully. For details, see

3.2 Logging In Through

the Web Page

.

l

Two telephone sets are connected to TEL1 and TEL2 on the ONT respectively.

Procedure

Step 1

Configure the parameters of the voice WAN interface.

1.

Coose

WAN

>

WAN Configuration

.

2.

In the pane on the right, click

New

. In the dialog box that is displayed, configure the

parameters of the WAN interface as follows:

4 Service Configuration Examples

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4-92

Huawei Proprietary and Confidential

Issue 02 (2011-01-26)

Page 179 / 232

l

Select

Enable

next to

NewWanConnction

to enable the WAN connection that is newly

set up.

l

Set

Service List

to

VOIP

.

l

Set

Mode

to

Route

.

l

Set

VLAN ID

to

200

.

l

Set

802.1p

to

6

.

l

Set

IP Acquisition Mode

to

DHCP

.

Figure 4-77

shows how to configure the parameters of the voice WAN interface.

Figure 4-77

Configuring the parameters of the voice WAN interface through the Web page

3.

Click

Apply

.

Step 2

Configure the parameters of the H.248-based voice interface.

1.

In the navigation tree on the left, choose

Voice

>

VoIP Interface Configuration

.

2.

In the pane on the right, configure the parameters of the H.248-based voice interface as

follows:

l

Set

MGC Address

below

Primary Server

to

172.23.1.2

.

l

Set

Register Format

to

DomainName

and

MG Domain

to

user.huawei.com

.

l

Set

Signaling Port Name

to

1_VOIP_R_VID_200

.

l

Set

Region Settings

to

CN - China

.

Figure 4-78

shows how to configure the parameters of the H.248-based voice interface.

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4 Service Configuration Examples

Issue 02 (2011-01-26)

Huawei Proprietary and Confidential

4-93

Page 180 / 232

Figure 4-78

Configuring the parameters of the H.248-based voice interface through the Web

page

3.

Click

Apply

.

Step 3

Configure the parameters of the H.248-based voice users.

1.

In the navigation tree on the left, choose

Voice

>

VoIP User Configuration

.

2.

In the pane on the right, configure the parameters of voice user 1 as follows:

l

Set

Line Name

to

A0

.

l

Set

Associated POTS

to

1

.

l

Select

Enable

to enable the voice user configuration.

In the pane on the right, click

New

to add voice user 2, and configure the parameters of

voice user 2 as follows:

l

Set

Line Name

to

A1

.

l

Set

Associated POTS

to

2

.

l

Select

Enable

to enable the voice user configuration.

Figure 4-79

shows how to configure the parameters of the H.248-based voice user.

4 Service Configuration Examples

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4-94

Huawei Proprietary and Confidential

Issue 02 (2011-01-26)

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share