4.7.3 Configuration Method
The Wi-Fi access service can be configured through the Web page or TR-069 server.
4.7.1 Data Plan
This topic provides the typical data plan for configuring the Wi-Fi access service to make good
preparations for the configuration.
Table 4-9
provides the data plan for configuring the Wi-Fi access service.
Table 4-9
Data plan for configuring the Wi-Fi access service
Parameter
Data
Description
Service type of
the WAN
interface
INTERNET
When
Connection mode
is set to
Route
, you can
select Internet, TR069, VoIP, or a combination of
them.
When configuring the Wi-Fi access service, you
need to select only Internet or a combination with
Internet. In this example, Internet is selected.
Connection
mode
Route
It can be set to route or bridge. In this example, route
is selected.
VLAN ID of the
WAN interface
300
The VLAN ID of the WAN interface must be the
same as the VLAN ID of the traffic streams
configured on the OLT.
Mode of
obtaining an IP
address
PPPoE
l
User name:
iadtest@pppoe
l
Password:
iadtest
There are three modes to obtain an IP address.
l
DHCP: Obtain an IP address dynamically.
l
Static: Configure an IP address manually.
l
PPPoE: Access in the PPPoE dialup mode.
In this example, the PPPoE mode is selected. You
can also choose the DHCP or static mode according
to the data plan of the upper-layer network. When
the PPPoE mode is selected, the configured user
name and password must be the same as those
planned on the BRAS.
802.1p
1
The larger the service priority value, the higher the
service priority. The priorities must be the same as
those planned on the OLT, that is, the priority
sequence is the voice service, multicast service, and
Internet access service/Wi-Fi service in a descending
order.
NAT function
Enable
Enable the network address translation (NAT)
function.
Port binding
SSID1
-
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4 Service Configuration Examples
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-113