Figure 4-99
Flowchart for configuring the Wi-Fi access service through the TR-069 server
4.7.3 Configuration Method
The Wi-Fi access service can be configured through the Web page or TR-069 server.
Configuring the Wi-Fi Access Service Through the Web Page
This topic provides an example of how to configure the Wi-Fi access service through the Web
page.
Prerequisite
l
ONT must be added or auto-discovered on the OLT and associated service streams must
be configured on the OLT. For details, see
4.2.1 Commissioning the Interoperation
Between OLT and ONT (Through CLI of the OLT)
or
4.2.2 Commissioning the
Interoperation Between OLT and ONT (Through the NMS)
.
l
The environment for service configuration on the Web page must be available and you
must be logged into the Web page successfully. For details, see
3.2 Logging In Through
the Web Page
.
l
A notebook or mobile phone with the Wi-Fi function is available. The IP address of the
notebook or mobile phone with the Wi-Fi function is allocated by the DHCP server (ONT).
After PPPoE dialup is successfully performed on the ONT, the notebook or mobile phone
with the Wi-Fi function can access the Internet by searching for the SSID.
Procedure
Step 1
Configure the Wi-Fi parameters.
1.
In the navigation tree, choose
Wi-Fi
>
Wi-Fi Basic Configuration
.
2.
Select
Enable Wireless
to enable the Wi-Fi function. Then, set the parameters as follows:
l
Set
SSID
to
ChinaNet-huawei
.
l
Set
Authentication Mode
to
WPA Pre-Shared Key
.
l
Set
Encryption Mode
to
TKIP&AES
and
WPA PreSharedKey to chinahuawei
.
Figure 4-100
shows how to configure the Wi-Fi parameters.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4 Service Configuration Examples
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-115