Prerequisite
l
ONT must be added or auto-discovered on the OLT and associated service streams must
be configured on the OLT. For details, see
4.2.1 Commissioning the Interoperation
Between OLT and ONT (Through CLI of the OLT)
or
4.2.2 Commissioning the
Interoperation Between OLT and ONT (Through the NMS)
.
l
ONT must be auto-discovered on the TR-069 server. For details, see
4.2.3 Commissioning
Interoperation Between the TR-069 Server and the ONT Through the Web Page
or
4.2.4 Commissioning Interoperation Between the TR-069 Server and the ONT
Through the NMS
.
l
Two telephone sets are connected to TEL1 and TEL2 on the ONT respectively.
Context
l
This topic describes how to configure only L3 Internet access service. For L2 Internet access
service, configuration is not required on the ONT but on the OLT. For details, see
4.2.1
Commissioning the Interoperation Between OLT and ONT (Through CLI of the
OLT)
or
4.2.2 Commissioning the Interoperation Between OLT and ONT (Through
the NMS)
.
l
Every data change must be saved. You can click
Save
in a window to save data changes.
If you navigate to another node without saving data changes, a dialog box will be displayed
prompting you to save the data changes. In this case, click
YES
in the dialog box. New
data will be automatically applied to the ONTs after the data changes are saved.
CAUTION
When configuring services on the TR-069 server, do not modify the WAN interface connecting
the TR-069 server and the ONT. Otherwise, the TR-069 server loses communication with the
ONT.
Procedure
Step 1
Log in to the TR-069 server and choose
Subnet View
>
TR069 Subnet
from the navigation
tree. In the terminal list, right-click an ONT and choose
Tools
>
Configure in Real Time
from
the shortcut menu.
Step 2
In the
Configure in Real Time
dialog box, set
Root Node
to
Internet gateway device
.
Step 3
Configure the parameters of the voice WAN interface.
1.
Choose
InternetGatewayDevice
>
WANDevice
>
1
>
WANConnectionDevice
from the
navigation tree. Click
Add
in the lower left part to create an instance.
2.
Choose
2
>
WANIPConnection
from the navigation tree. Click
Add
in the lower left part.
Choose
1
from the navigation tree. In the right pane, set the parameters as follows:
l
Set
Enable
to
1
, indicating that the WAN connection is enabled.
l
Set
Connection Type
to
IP_Routed
, indicating that the connection type of the WAN
interface is in routing mode.
l
Set
Addressing Type
to
DHCP
, indicating that the WAN interface obtains IP addresses
in DHCP mode.
4 Service Configuration Examples
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4-106
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)