Page 181 / 232 Scroll up to view Page 176 - 180
Figure 4-79
Configuring the parameters of the H.248-based voice user through the Web page
3.
Click
Apply
.
Step 4
Save the configuration.
Choose
System Tools
>
Configuration File
from the navigation tree. In the right pane, click
Save Configuration
, as shown in
Figure 4-80
.
Figure 4-80
Saving the configuration
Step 5
Restart the voice process.
In the navigation tree on the left, choose
Status
>
VoIP Information
. In the pane on the right,
click
Restart VoIP
, as shown in
Figure 4-81
.
Figure 4-81
Restarting the voice process
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4 Service Configuration Examples
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-95
Page 182 / 232
----End
Result
1.
Query the connection status of the ONT.
In the navigation tree on the left, choose
Status
>
WAN Information
. In the pane on the
right, the
Status
is
Connected
and the obtained IP address is displayed in
IP
.
Figure 4-82
shows how to query the connection status of voice service.
Figure 4-82
Querying connection status of voice service
2.
Query the registration status of the voice user.
In the navigation tree on the left, choose
Status
>
VoIP Information
. In the pane on the
right, the
User Status
is
Up
.
Figure 4-83
shows how to query the registration status of voice user.
Figure 4-83
Querying the registration status of voice user
3.
Verify the service.
User 1 with telephone number
88001234
can call user 2 with telephone number
88001235
, and the communication between them is normal. The same is true when user 2
calls user 1.
4 Service Configuration Examples
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4-96
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)
Page 183 / 232
NOTE
The termination IDs of line 1 and line 2 configured on the MGC correspond to telephone numbers
88001234
and
88001235
respectively.
Configuring the H.248-based Voice Service Through the NMS
This topic provides an example of how to configure the H.248-based voice service through the
NMS.
Prerequisite
l
ONT must be added or auto-discovered on the OLT and associated service streams must
be configured on the OLT. For details, see
4.2.1 Commissioning the Interoperation
Between OLT and ONT (Through CLI of the OLT)
or
4.2.2 Commissioning the
Interoperation Between OLT and ONT (Through the NMS)
.
l
Two telephone sets are connected to TEL1 and TEL2 on the ONT respectively.
Context
l
The procedures for configuring the HG8240, HG8247, and HG8245 are the same. This
topic considers the HG8245 as an example to describe how to configure the ONT.
l
The following section considers the creation of an ONT VAS profile as an example to
describe how to bulk configure ONTs. To configure a single ONT, right-click the ONT on
the GPON ONU tab page, and choose
Configure Value-Added Service
from the shortcut
menu. Details will not be provided in this topic.
Procedure
Step 1
Choose
Profile
>
ONT VAS Profile
from the main menu.
Step 2
Right-click and choose
Add
from the shortcut menu.
Step 3
In the dialog box that is displayed, set
Profile Name
,
Vendor ID
,
Terminal Type
, and
Version
. Where,
Version
must be set to
V1R002C00-Later
.
Figure 4-84
shows how to create an ONT VAS profile.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4 Service Configuration Examples
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-97
Page 184 / 232
Figure 4-84
Creating an ONT VAS profile
Step 4
Configure the parameters of the voice WAN interface.
Choose
WAN Device
>
WAN Device 1
>
WAN Connection
from the navigation tree. Right-
click
WAN Connection
and choose
Add IP Connection
from the shortcut menu. Choose
WAN
IP Interface 1
from the navigation tree. In the right pane, set the parameters as follows:
l
Set
WAN Interface Name
to
wan-voice
.
l
Set
WAN Enable
to
enable
.
l
Set
Connection Type
to
IP_Routed
.
l
Set
Vlan ID
to
200
.
l
Set
Priority
to
6
.
l
Set
Addressing Type
to
DHCP
.
l
Set
Service Type
to
VOIP
.
Figure 4-85
shows how to configure the parameters of the voice WAN interface.
4 Service Configuration Examples
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4-98
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)
Page 185 / 232
Figure 4-85
Configuring the parameters of the voice WAN interface
Step 5
Configure the voice protocol parameters.
Choose
Services
>
Voice Service
>
Voice Service 1
>
Interface configuration
>
Interface1
from the navigation tree. In the right pane, configure the voice protocol parameters as follows:
l
Set
Signaling Protocol
to
H248
.
l
Set
Region
to
China
.
l
Set
Associate WAN Interface
to
wan1
to bind the WAN interface for voice configuration.
Figure 4-86
shows how to configure the voice protocol parameters.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4 Service Configuration Examples
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-99

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top