Page 136 / 232 Scroll up to view Page 131 - 135
Result
1.
Query the connection status of the ONT.
In the navigation tree on the left, choose
Status
>
WAN Information
. In the pane on the
right, the
Status
is
Connected
and the obtained IP address is displayed in
IP
.
Figure 4-38
shows the connection status of the L3 Internet access service.
Figure 4-38
Querying connection status of L3 Internet access service
2.
Verify the service.
The PC obtains the IP addresses automatically. After the PPPoE dialup is successfully
performed on the ONT, the PC can automatically obtain the IP addresses allocated by the
ONT through DHCP. Then, the Internet access service is provisioned after websites are
entered into Internet Explorer (IE) address bars of the PC.
Configuring the Internet Access Service Through the NMS
This topic provides an example of how to configure the Internet access service through the NMS.
Prerequisite
l
ONT must be added or auto-discovered on the OLT and associated service streams must
be configured on the OLT. For details, see
4.2.1 Commissioning the Interoperation
Between OLT and ONT (Through CLI of the OLT)
or
4.2.2 Commissioning the
Interoperation Between OLT and ONT (Through the NMS)
.
l
A PC is connected to port LAN2 on the ONT. The IP address of the PC is allocated by the
DHCP server (the ONT). PPPoE dialup is performed on the ONT to implement the L3
Internet access service of the PC.
4 Service Configuration Examples
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4-50
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)
Page 137 / 232
Context
NOTE
l
This topic describes how to configure only L3 Internet access service. For L2 Internet access service,
configuration is not required on the ONT but on the OLT. For details, see
4.2.1 Commissioning the
Interoperation Between OLT and ONT (Through CLI of the OLT)
or
4.2.2 Commissioning the
Interoperation Between OLT and ONT (Through the NMS)
.
l
The procedures for configuring the HG8240, HG8247, and HG8245 are the same. This topic considers
the HG8245 as an example to describe how to configure the ONT.
l
The following section considers the creation of an ONT VAS profile as an example to describe how
to bulk configure ONTs. To configure a single ONT, right-click the ONT on the GPON ONU tab page,
and choose
Configure Value-Added Service
from the shortcut menu. Details will not be provided in
this topic.
Procedure
Step 1
Choose
Profile
>
ONT VAS Profile
from the main menu.
Step 2
Right-click and choose
Add
from the shortcut menu.
Step 3
In the dialog box that is displayed, set
Profile Name
,
Vendor ID
,
Terminal Type
, and
Version
. Where,
Version
must be set to
V1R002C00-Later
.
Figure 4-39
shows how to create an ONT VAS profile.
Figure 4-39
Creating an ONT VAS profile
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4 Service Configuration Examples
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-51
Page 138 / 232
Step 4
Configure the working mode of a LAN port.
Choose
LANDevice
>
LAN Interface 1
>
LAN Interface
>
LAN Ethernet Configuration
2
from the navigation tree. In the right pane, set
LAN Port twothree-port enable
to
enable
,
indicating that port LAN2 works in the L3 mode (gateway mode).
Figure 4-40
shows how to configure the working mode of a LAN port.
Figure 4-40
Configuring the working mode of a LAN port
NOTE
l
When
LAN Port two three-port enable
is set to
disable
, it indicates that the corresponding LAN port
works in the L2 mode.
l
When
LAN Port two three-port enable
is set to
enable
, it indicates that the corresponding LAN port
works in the L3 mode.
By default,
LAN Port two three-port enable
is set to
disable
.
Step 5
Configure the parameters of the WAN interface.
1.
Choose
WAN Device
>
WAN Device 1
>
WAN Connection
from the navigation tree.
Right-click the
WAN Connection
branch and choose
Add PPP Connection
from the
4 Service Configuration Examples
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4-52
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)
Page 139 / 232
shortcut menu. Choose the
WAN PPP Interface1
branch from the navigation tree. In the
right pane, configure the parameters of the WAN interface as follows:
l
Set
WAN Interface Name
to
wan-internet
.
l
Set
WAN Enable
to
enable
.
l
Set
Connection Type
to
IP_Routed
.
l
Set
NATEnable
to
enable
.
l
Set
Service Type
to
INTERNET
.
l
Set
Vlan ID
to
150
.
l
Set
Priority
to
1
.
Figure 4-41
shows how to configure the parameters of the WAN interface.
Figure 4-41
Configuring the parameters of the WAN interface
2.
Select
LAN&WANBindNode
under
WAN PPP Connection 1
in the navigation tree. In
the right pane, set
LAN2 Enabled
to
enable
to bind the WAN interface to LAN port 2.
Figure 4-42
shows how to bind the WAN interface.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4 Service Configuration Examples
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-53
Page 140 / 232
Figure 4-42
Binding the WAN interface
Step 6
Click
OK
.
Step 7
Bind the ONT VAS profile to the ONT.
On the GPON ONU tab page, select one or more ONTs, right-click, and then choose
Bind VAS
Profile
from the shortcut menu. In the dialog box that is displayed, select the new profile and
click
OK
to bind the profile to the ONT.
Step 8
On the GPON ONU tab page, right-click an ONT and choose
Configure Value-Added
Service
from the shortcut menu.
Step 9
Configure the PPPoE user name and password.
Choose
WAN Device
>
WAN Device 1
>
WAN Connection
>
WAN Connection 1
>
WAN
PPP Interface
>
WAN PPP Interface 1
from the navigation tree. In the right pane, set
User
Name
to
iadtest@pppoe
and
Password
to
iadtest
.
Figure 4-43
shows how to configure the PPPoE user name and password.
4 Service Configuration Examples
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4-54
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top