Page 126 / 232 Scroll up to view Page 121 - 125
2.
To modify the XML configuration file, do as follows:
(1)
Open the exported XML configuration file and locate the configuration
parameters to be modified.
(2)
Modify the parameter values according to requirements.
(3)
Save the changes to the XML configuration file.
3.
To import the XML configuration file to the NMS, do as follows:
(1)
On the
GPON ONU
tab page, right-click an ONT and choose
Configure Value-
Added Service
from the shortcut menu.
(2)
In the dialog box that is displayed, click
Import
. In the dialog box that is
displayed, select the modified XML configuration file to import.
Figure 4-28
shows how to import the XML configuration file.
Figure 4-28
Importing the XML configuration file
(3)
Click
OK
. The NMS applies new configuration data to the ONT.
4 Service Configuration Examples
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4-40
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)
Page 127 / 232
l
Bulk configuring services for ONTs
1.
To create an ONT VAS profile, do as follows:
(1)
Choose
Profile
>
ONT VAS Profile
from the main menu.
(2)
In the window that is displayed, right-click and choose
Add
from the shortcut
menu.
(3)
In the dialog box that is displayed, set
Profile Name
,
Vendor ID
,
Terminal
Type
, and
Version
. Where,
Version
must be set to
V1R002C00-Later
.
Figure 4-29
shows how to create an ONT VAS profile.
Figure 4-29
Creating an ONT VAS profile
2.
To export the XML configuration file, do as follows:
In the
Add ONT VAS Profile
dialog box, click
Export
to export the XML
configuration file.
Figure 4-30
shows how to export the XML configuration file.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4 Service Configuration Examples
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-41
Page 128 / 232
Figure 4-30
Exporting the XML configuration file
3.
To modify the XML configuration file, do as follows:
(1)
Open the exported XML configuration file and locate the configuration
parameters to be modified.
(2)
Modify the parameter values according to requirements.
(3)
Save the changes to the XML configuration file.
4.
To import the XML configuration file, do as follows:
In the
Add ONT VAS Profile
dialog box, click
Import
to import the XML
configuration file to the NMS.
Figure 4-31
shows how to import the XML configuration file.
4 Service Configuration Examples
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4-42
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)
Page 129 / 232
Figure 4-31
Importing the XML configuration file
5.
Click
OK
.
6.
To bind the ONT VAS profile to ONTs, do as follows:
On the GPON ONU tab page, select one or more ONTs, right-click, and then choose
Bind VAS Profile
from the shortcut menu. In the dialog box that is displayed, select
the new profile and click
OK
to bind the profile to the ONTs.
NOTE
After voice parameters in the XML file are issued, the ONT re-starts the voice process. Then, the
voice parameters are read from the XML file and take effect. The ONT does not need to reset.
----End
4.4 Configuring the Internet Access Service
This topic provides an example of how to configure the Internet access service.
4.4.1 Data Plan
This topic provides the typical data plan for configuring the Internet access service so as to make
good preparations for the configuration.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4 Service Configuration Examples
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-43
Page 130 / 232
4.4.2 Configuration Flowchart
This topic shows the flowchart for configuring the L3 Internet access service.
4.4.3 Configuration Method
The Internet access service can be configured through the Web page, N2000 BMS, or TR-069
server.
4.4.1 Data Plan
This topic provides the typical data plan for configuring the Internet access service so as to make
good preparations for the configuration.
The Internet access service includes the L2 Internet access service and L3 Internal access service.
l
L2 Internet access service: In this mode, the ONT functions as a bridge device. Instead, the
OLT issues the L2 Internet access service to the ONT.
l
L3 Internet access service: The ONT functions as a gateway device and the WAN interface
needs to be configured.
NOTE
This topic mainly describes how to configure the L3 Internet access service. The L2 Internet access service
need not be configured on the ONT but on the OLT. For details, see
4.2.1 Commissioning the
Interoperation Between OLT and ONT (Through CLI of the OLT)
, or
4.2.2 Commissioning the
Interoperation Between OLT and ONT (Through the NMS)
.
Table 4-6
provides the data plan for configuring the L3 Internet access service.
Table 4-6
Data plan for configuring the L3 Internet access service
Parameter
Data
Description
Working mode
of a LAN port
L3 mode
Configure port LAN2 to work in layer 3 mode.
Service type of
the WAN
interface
INTERNET
When
Connection mode
is set to
Route
, you can
select Internet, TR069, VoIP, or a combination of
them.
When configuring the Internet access service, you
need to select only Internet or a combination with
Internet. In this example, Internet is selected.
Connection
mode
Route
It can be set to route or bridge. In this example,
route is selected.
VLAN ID of the
WAN interface
150
The VLAN ID of the WAN interface must be the
same as the VLAN ID of the traffic streams
configured on the OLT.
4 Service Configuration Examples
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4-44
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top