Page 106 / 232 Scroll up to view Page 101 - 105
Figure 4-10
Adding a GEM port
6.
Click
OK
.
7.
Add a GEM connection.
The following section considers L2 Internet access service as an example to describe how
to add a GEM connection. GEM connection 150, 200, 300, and 320 are used for L3 Internet
access service, voice service, Wi-Fi service, and TR-069 server management channel
respectively.
In the left pane, right-click
GEM Port0
that is created and choose
ADD GEM
Connection
from the shortcut menu. In the dialog box that is displayed, set
VLAN ID
to
100
, the CVLAN.
Figure 4-11
shows how to add a GEM connection.
4 Service Configuration Examples
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4-20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)
Page 107 / 232
Figure 4-11
Adding a GEM connection
8.
Click
OK
.
9.
Right-click the new line profile and choose
Download to NE
from the shortcut menu. In
the dialog box that is displayed, select the required OLT and click
OK
.
Step 5
Configure the ONT service profile.
1.
Choose
Profile
>
PON
>
GPON Profile
from the main menu.
2.
In the window that is displayed, click the
GPON Service Profile
tab. On the
GPON Service
Profile
tab page, right-click and choose
Add Global Profile
from the shortcut menu.
Parameter values vary with terminal types.
Assume that the HG8240 or HG8245 is used. Set the parameters as follows:
l
Set
Name
to
srvprofile-gpon
.
l
Set
Number of Pots Ports
to
2
.
l
Set
Number of ETH Ports
to
4
.
Figure 4-12
shows how to configure the ONT service profile (HG8240/HG8245).
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4 Service Configuration Examples
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-21
Page 108 / 232
Figure 4-12
Configuring the ONT service profile (HG8240/HG8245)
Assume that the HG8247 is used. Set the parameters as follows:
l
Set
Name
to
srvprofile-gpon
.
l
Set
Number of Pots Ports
to
2
.
l
Set
Number of ETH Ports
to
4
.
l
Set
Number of CATV Ports
to
1
.
Figure 4-13
shows how to configure the ONT service profile (HG8247).
4 Service Configuration Examples
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4-22
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)
Page 109 / 232
Figure 4-13
Configuring the ONT service profile (HG8247)
NOTE
The port capability set in the ONT service profile must be the same as the actual port capability set
of the ONT. The HG8240 and HG8245 each has four Ethernet ports and two POTS ports. The HG8247
has one CATV port, four Ethernet ports, and two POTS ports.
3.
Configure the default VLAN ID.
The default VLAN ID of Ethernet port 1 is 100 for L2 Internet access service.
NOTE
This operation is applicable to only L2 Internet access service. Specifically, when an ONT works as
a bridge, packets must be labeled with VLAN tags before entering the ONT and the VLAN tags must
be stripped from the packets before the packets leave the ONT; when an ONT works as a gateway
device, the VLAN IDs of ports can be set on the Web page of the ONT, on the NMS, or on the TR-069
server.
In the dialog box as shown in
Figure 4-13
, choose
UNI Port
from the navigation tree. In
the right pane, right-click Ethernet port 1 and choose
Config VLAN of UNI Port
from the
shortcut menu. In the dialog box that is displayed, select the
Default VLAN
check box and
set
Default VLAN
to
100
, the CVLAN ID.
Figure 4-14
shows how to configure the default VLAN ID.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4 Service Configuration Examples
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-23
Page 110 / 232
Figure 4-14
Configuring the default VLAN ID
4.
Click
OK
.
5.
Configure the VLAN switching pair of a UNI port.
The following section considers L2 Internet access service as an example to describe how
to configure the VLAN switching pair of a UNI port. Both
S-VLAN
and
C-VLAN
must
be set to 150, 200, 300, and 320 for L3 Internet access service, voice service, Wi-Fi service,
and TR-069 server management channel respectively.
In the lower pane, right-click and choose
Add
from the shortcut menu. In the dialog box
that is displayed, set both
S-VLAN
and
C-VLAN
to
100
. In this case,
S-VLAN
must be
the same as
C-VLAN
.
Figure 4-15
shows how to configure the VLAN switching pair of the UNI port.
4 Service Configuration Examples
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4-24
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top