Figure 4-15
Configuring the VLAN switching pair of the UNI port
6.
Click
OK
.
7.
Right-click the new service profile and choose
Download to NE
from the shortcut menu.
In the dialog box that is displayed, select the OLT and click
OK
.
Step 6
Add an ONT.
NOTE
l
An ONT can be added in auto-discovery or offline mode. This topic considers the auto-discovery mode
as an example to describe how to add an ONT.
l
You can also right-click on the
GPON ONU
tab page of an OLT and choose
Add
from the shortcut
menu to add an ONT offline.
1.
On the
GPON UNI Port
tab page, select one or more required ONTs from the ONT list,
right-click, and then choose
Enable ONU Auto Find
from the shortcut menu to enable the
ONT auto-discovery function.
2.
On the
GPON UNI Port
tab page, select the required ONT from the ONT list, and click
the
Auto-Discovered ONU Info
tab in the lower pane. Right-click and choose
Confirm
ONU
from the shortcut menu. In the dialog box that is displayed, set the parameters as
follows:
l
Set
ONU ID
to
0
.
l
Set
ONU Type
to
ONT
.
l
Set
Line Profile
to
lineprofile-gpon
.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4 Service Configuration Examples
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-25