Page 121 / 232 Scroll up to view Page 116 - 120
Figure 4-24
Creating an ONT VAS profile
Step 4
Configure the parameters of the WAN interface.
Choose
WAN Device
>
WAN Device 1
>
WAN Connection
from the navigation tree. Right-
click
WAN Connection
and choose
Add IP Connection
from the shortcut menu. Choose
WAN
IP Interface 1
from the navigation tree. In the right pane, configure the parameters of the WAN
interface as follows:
l
Set
WAN Interface Name
to
tr069
.
l
Set
WAN Enable
to
enable
.
l
Set
Connection Type
to
IP_Routed
.
l
Set
Vlan ID
to
320
.
l
Set
Addressing Type
to
DHCP
.
l
Set
Service Type
to
TR069
.
Figure 4-25
shows how to configure the parameters of the WAN interface.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4 Service Configuration Examples
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-35
Page 122 / 232
Figure 4-25
Configuring the parameters of the WAN interface
Step 5
Configure the TR-069 parameters.
1.
In the
Add ONT VAS Profile
dialog box, click
Export
in the lower pane to export the
XML configuration file.
2.
Open the XML configuration file and modify the parameters in the XML file as follows:
l
Set
URL
to
.
l
Set
ConnectionRequestPassword
and
ConnectionRequestUsername
to
server
.
3.
Save the XML configuration file.
4.
In the
Add ONT VAS Profile
dialog box, click
Import
in the lower pane to import the
modified XML configuration file.
Step 6
Click
OK
.
Step 7
Bind the ONT VAS profile to the ONT.
On the GPON ONU tab page, select one or more ONTs, right-click, and then choose
Bind VAS
Profile
from the shortcut menu. In the dialog box that is displayed, select the new profile and
click
OK
to bind the profile to the ONT.
Step 8
Confirm the ONT.
4 Service Configuration Examples
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4-36
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)
Page 123 / 232
Log in to the TR-069 server and then choose
Subnet view
>
TR-069 Subnet
from
WLAN and
Home Network View
in the navigation tree on the left. In the pane on the right, right-click and
choose
Refresh
from the shortcut menu. The reported ONT list is displayed. Then, select the
ONT list, right-click, and choose
Confirm
from the shortcut menu.
----End
Result
On the TR-069 server, you can configure ONT services. For details, see the configuration
examples.
4.3 XML Configuration Methods
4.3.1 Configuring the ONT through Web Page by Uploading the XML Configuration File
This topic describes how to configure an ONT through the Web page by uploading the XML
configuration file.
4.3.2 Configuring the ONT through NMS by Importing the XML Configuration File
This topic describes how to configure the ONT through NMS by importing the XML
configuration file.
4.3.1 Configuring the ONT through Web Page by Uploading the
XML Configuration File
This topic describes how to configure an ONT through the Web page by uploading the XML
configuration file.
Prerequisite
l
ONT must be added or auto-discovered on the OLT and associated service streams must
be configured on the OLT. For details, see
4.2.1 Commissioning the Interoperation
Between OLT and ONT (Through CLI of the OLT)
or
4.2.2 Commissioning the
Interoperation Between OLT and ONT (Through the NMS)
.
l
The environment for service configuration on the Web page must be available and you
must be logged into the Web page successfully. For details, see
3.2 Logging In Through
the Web Page
.
Context
The ONT can be configured by uploading the XML configuration file. By using the method,
configurations of the voice, WAN interface management, LAN port management, and line
management are implemented on the ONT. The naming rule of the XML configuration file
released with the software is XXXX_default_service_cfg.xml (XXXX indicates the software
version number).
Procedure
Step 1
Download the XML configuration file.
1.
In the navigation tree on the left, choose
System Tools
>
Configuration File
.
2.
In the pane on the right, click
Download Configuration File
, as shown in
Figure 4-26
.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4 Service Configuration Examples
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-37
Page 124 / 232
Figure 4-26
Downloading the XML configuration file
3.
In the dialog box that is displayed, click
Save
to save the XML configuration file.
Step 2
Modify the XML configuration file.
NOTE
In the case of initial deployment, use the XML configuration file released with the software. Thus, you
need not perform operations in step 1.
1.
Open the XML configuration file downloaded in step 1 and find the parameters requiring
modification.
2.
Modify the relevant parameters.
3.
Save the modified XML configuration file.
Step 3
Upload the XML configuration file.
1.
In the navigation tree on the left, choose
System Tools
>
Configuration File
.
2.
In the pane on the right, click
Browse
. Then, select the XML configuration file saved in
step 2 and click
Open
.
3.
In the pane on the right, click
Upload Configuration File
. After the XML configuration
file is uploaded, the ONT automatically restarts and then the configuration takes effect.
----End
4.3.2 Configuring the ONT through NMS by Importing the XML
Configuration File
This topic describes how to configure the ONT through NMS by importing the XML
configuration file.
Prerequisite
ONT must be added or auto-discovered on the OLT and associated service streams must be
configured on the OLT. For details, see
4.2.1 Commissioning the Interoperation Between
OLT and ONT (Through CLI of the OLT)
or
4.2.2 Commissioning the Interoperation
Between OLT and ONT (Through the NMS)
.
4 Service Configuration Examples
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4-38
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)
Page 125 / 232
Context
The ONT can be configured by importing the XML configuration file. By using the method,
configurations of the voice, WAN interface management, LAN port management, and line
management are implemented on the ONT. Configuring the ONT through NMS by importing
the XML configuration file is typically applied in the following scenarios:
l
Configuring services for a single ONT
l
Bulk configuring services for ONTs
Procedure
l
Configuring services for a single ONT
1.
To export the XML configuration file, do as follows:
(1)
On the
GPON ONU
tab page, right-lick an ONT and choose
Configure Value-
Added Service
from the shortcut menu.
(2)
In the dialog box that is displayed, click
Export
to export the XML configuration
file.
Figure 4-27
shows how to export the XML configuration file.
Figure 4-27
Exporting the XML configuration file
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
4 Service Configuration Examples
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-39

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top