Page 31 / 74
Scroll up to view Page 26 - 30
25
SB5100 Series Cable Modem User Guide
Configuring TCP/IP in Windows 95, 98, or Windows Me, continued
Introduction
Before You Begin
Installation & Configuration
FAQ
Troubleshooting
Glossary
License
X
Home
Print
Exit
10
Click
TCP/IP
on the Network window. If there is more than one TCP/IP entry, choose
the one for the Ethernet card or USB port connected to the cable modem.
11
Click
Properties
. The TCP/IP window is displayed.
12
Click the
IP Address
tab.
13
Click
Obtain an IP address automatically
.
14
Click
OK
to accept the TCP/IP settings.
15
Click
OK
to close the Network window.
16
Click
OK
when prompted to restart your computer and click
OK
again.
When you complete TCP/IP configuration, go to
“Verifying the IP Address in Windows 95,
Windows 98, or Windows Me”
on page 37.
Page 32 / 74
License
26
SB5100 Series Cable Modem User Guide
X
Home
Print
Exit
Introduction
Before You Begin
Installation & Configuration
FAQ
Troubleshooting
Glossary
Configuring TCP/IP in Windows 2000
1
On the Windows Desktop, click
Start
.
2
Select
Settings
and then
Control Panel
from the pop-up menus.
3
Double-click the
Network and Dial-up Connections
icon on the Control Panel
window.
4
On the Network and Dial-up Connections window, double-click
Local Area
Connection
number
. The value of
number
varies from system to system. The Local
Area Connection
number
Status window is displayed.
Page 33 / 74
27
SB5100 Series Cable Modem User Guide
Configuring TCP/IP in Windows 2000, continued
Introduction
Before You Begin
Installation & Configuration
FAQ
Troubleshooting
Glossary
License
X
Home
Print
Exit
5
Click
Properties
. Information similar to the lower window is displayed.
6
If Internet Protocol (TCP/IP) is in the list of components, TCP/IP is installed. You can
skip to step 10.
If Internet Protocol (TCP/IP) is not in the list, click
Install
. The Select Network
Component Type window is displayed. Continue with step 7.
Page 34 / 74
28
SB5100 Series Cable Modem User Guide
Configuring TCP/IP in Windows 2000, continued
Introduction
Before You Begin
Installation & Configuration
FAQ
Troubleshooting
Glossary
License
X
Home
Print
Exit
7
Click
Protocol
on the Select Network Component Type
window and click
Add
. The
Select Network Protocol window is displayed.
8
Click
Internet Protocol (TCP/IP)
in the Network Protocol section on the Select
Network Protocol window.
9
Click
OK
. The Local Area Connection
number
Properties window is re-displayed.
Page 35 / 74
29
SB5100 Series Cable Modem User Guide
Configuring TCP/IP in Windows 2000, continued
Introduction
Before You Begin
Installation & Configuration
FAQ
Troubleshooting
Glossary
License
X
Home
Print
Exit
10
On the Local Area Connection
number
Properties window, be sure the box next to
Internet Protocol (TCP/IP)
is checked.
11
Click
Properties
. The Internet Protocol (TCP/IP) Properties window is displayed as
shown at bottom left.
12
Be sure
Obtain IP address automatically
and
Obtain DNS server address
automatically
are selected.
13
Click
OK
to accept the TCP/IP settings.
14
Click
OK
to close the Local Area Connection
number
Properties window.
15
Click
OK
when prompted to restart your computer and click
OK
again.
When you complete the TCP/IP configuration, go to
“Verifying the IP Address in Windows
2000 or Windows XP”
on page 38.
19216811.live