Motorola 2210-02-1006 Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of Motorola 2210-02-1006 router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 18
User Manual
The Motorola Netopia
ADSL2+ Gateway
Single-port Ethernet
Downloaded from
manuals search engine
Page 2 / 18
Connect the power supply cord to
the power jack on the Motorola Modem. Plug the power supply into an appropriate electrical outlet.
Depending on the power supply provided with the product, either the direct plug-in power supply blades, power sup-
ply cord plug or the appliance coupler serves as the mains power disconnect. It is important that the direct plug-in power supply,
socket-outlet or appliance coupler be located so it is readily accessible.
Apparaten skall anslutas till jordat uttag när den ansluts till ett nätverk
Apparatet må kun tilkoples jordet stikkontakt.
When using your telephone equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric shock and injury to persons, including the follow-
Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement or
near a swimming pool.
Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electrical shock
from lightning.
Do not use the telephone to report a gas leak in the vicinity of the leak.
The Motorola Modem is intended for use in a consumer's home. Ambient temperatures around
this product should not exceed 104°F (40°C).
It should not be used in locations exposed to outside heat radiation or trapping of its
own heat. The product should have at least one inch of clearance on all sides except the bottom when properly installed and should
not be placed inside tightly enclosed spaces unless proper ventilation is provided.
Motorola Part Number:
Copyright © 2007 by Motorola, Inc.
All rights reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation,
transformation or adaptation) without written permission from Motorola, Inc.
Motorola reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of Motorola to pro-
vide notification of such revision or change. Motorola provides this guide without warranty of any kind, either implied or expressed, including, but not lim-
ited to, the implied warranties of merchantability and fitness for a particular purpose. Motorola may make improvements or changes in the product(s)
described in this manual at any time. MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. Microsoft, Windows, Win-
dows Me, and Windows NT are either trademarks or registered trademarks of Microsoft Corporation in the U.S and/or other countries. Macintosh is a reg-
istered trademark of Apple, Inc. Firefox is a registered trademark of the Mozilla Foundation. All other product or service names are the property of their
respective owners.
Safety Information
Downloaded from
manuals search engine
Page 3 / 18
Thank you for selecting the Motorola Netopia
2210-02 ADSL2+ Gateway. This guide will help you set
up and configure your network.
Check your package contents. It should contain the items shown here:
If you don’t have everything, contact your supplier immediately.
Motorola Modem
User Manual
Yellow RJ-45
Ethernet Cable
Gray RJ-11
Phone Cable
CD and
Wallmount Template
Downloaded from
manuals search engine
Page 4 / 18
Macintosh users: skip to Step #2 below.
1. Windows users: Insert the Motorola Netopia CD into your CDROM drive. The
Installation Guide Wizard should start automatically and the Welcome screen
should appear to step through your connection installation(s).
The Motorola Netopia Installation Guide Wiz-
ard automates several tasks to get you up and
running easily. Run the Wizard on every Win-
dows-based PC that will connect to your net-
Click the
Follow the on-screen instructions to make all
of your connections.
2. Locate the Modem near a power source, a DSL wall outlet, and in a location
where air can circulate freely around it.
3. Connect the rounded end of the power supply to the power jack on the back panel
of the Modem. Then, plug the power supply into an electrical outlet.
LED should light solid green.
4. Connect one end of the gray RJ-11 Phone cable to the port labeled “DSL” on the
Modem. Connect the other end of the Phone cable to your DSL wall outlet.
Downloaded from
manuals search engine
Page 5 / 18
5. Connect one end of the yellow RJ-45 Ethernet cable to the port labeled “Ethernet”
on the modem. Connect the other end of the Ethernet cable to the Ethernet port on
your PC.
Rear View
DSL Port
Downloaded from
manuals search engine


4.7 / 5 based on 3 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!