Page 21 / 74
Scroll up to view Page 16 - 20
15
SB5100 Series Cable Modem User Guide
Setting Up a USB Driver in Windows 98, continued
Introduction
Before You Begin
Installation & Configuration
FAQ
Troubleshooting
Glossary
License
X
Home
Print
Exit
After all the necessary files are loaded, the window at upper left is displayed
confirming a successful installation.
10
Click
Finish.
The window at bottom left is displayed.
11
Click
Yes
to restart your computer.
When you finish setting up the USB driver, you can continue with
“Configuring TCP/IP in
Windows 95, 98, or Windows Me”
on page 23.
If you have difficulties setting up the USB driver, perform
“Removing the USB Driver from
Windows 98 or Windows Me”
on page 45 and repeat this procedure. If that does not
correct your problem, see the
Regulatory, Safety, Software License, and Warranty
Information
card provided with your SURFboard cable modem for information about
obtaining warranty service.
Page 22 / 74
License
16
SB5100 Series Cable Modem User Guide
X
Home
Print
Exit
Introduction
Before You Begin
Installation & Configuration
FAQ
Troubleshooting
Glossary
Setting Up a USB Driver in Windows
2000
Be sure the
SURFboard Cable Modem
CD-ROM is inserted into the CD-ROM drive
before you plug in the USB cable. A few seconds after you complete the USB
connection, the Found New Hardware window is displayed.
1
Click
Next
.
2
Be sure “Search for a suitable driver for my device” is selected.
3
Click
Next
.
Although your SURFboard cable modem model number may
be different than in the images in this guide, the procedure is
the same.
Page 23 / 74
17
SB5100 Series Cable Modem User Guide
Setting Up a USB Driver in Windows 2000, continued
Introduction
Before You Begin
Installation & Configuration
FAQ
Troubleshooting
Glossary
License
X
Home
Print
Exit
4
Be sure “CD-ROM drives” is the only box checked.
5
Click
Next
.
6
Click
Next
.
If the Insert Disk window is displayed, be sure the
SURFboard Cable Modem
CD-ROM is in the CD-ROM drive and follow steps 7 to 12. Otherwise, you can skip
to step 13.
Page 24 / 74
18
SB5100 Series Cable Modem User Guide
Setting Up a USB Driver in Windows 2000, continued
Introduction
Before You Begin
Installation & Configuration
FAQ
Troubleshooting
Glossary
License
X
Home
Print
Exit
7
On the Insert Disk window, click
OK
. The Files Needed window is displayed.
8
If necessary, select your CD-ROM drive in the Copy files from list.
9
Click
Browse
.
10
Locate the NetMotCM.sys file in the CD-ROM root directory.
11
Double-click the
NetMotCM.sys
file. The Files Needed window is displayed.
12
Click
OK
. The Found New Hardware Wizard window is displayed.
Page 25 / 74
19
SB5100 Series Cable Modem User Guide
Setting Up a USB Driver in Windows 2000, continued
Introduction
Before You Begin
Installation & Configuration
FAQ
Troubleshooting
Glossary
License
X
Home
Print
Exit
13
Click
Finish
to complete the installation.
When you finish setting up the USB driver, you can continue with
“Configuring TCP/IP in
Windows 2000”
on page 26.
If you have any difficulties setting up the USB driver, perform
“Removing the USB Driver
from Windows 2000”
on page 49 and repeat this procedure.
19216811.live