Huawei HG8247H Router Manual PDF (Setup & Configuration Guide)

Page 246 / 358 Scroll up to view Page 241 - 245

Prerequisite

l

The Layer 2 service channels between the OLT and ONTs are enabled by running the OLT

commands. For details, see

3.4.1.1 Enabling Layer 2 Service Channels Between an OLT

and a GPON ONT (on the OLT CLI)

.

l

The ONT is auto discovered on the U2560. For details, see

3.5.1.1 Commissioning

Interoperation Between the U2560 and the ONT Through the Web Page

.

l

The user-side PC must be connected with the LAN port of an ONT by using network cables.

Context

The Internet access service includes the Layer 2 Internet access service and Layer 3 Internal

access service.

l

Layer 2 Internet access service: The PPPoE dialup is performed on the PC. The IP address

is allocated by the upper-layer BRAS. The ONT is connected to the OLT and then to the

upper-layer network in the Layer 2 mode to provide the high-speed Internet access service.

l

Layer 3 Internet access service: The PPPoE auto dialup is performed on the ONT. The IP

address is allocated by the DHCP IP address pool on the ONT. The ONT is connected to

the OLT and then to the upper-layer network in the Layer 3 mode to provide the high-speed

Internet access service.

You do not need to configure the Layer 2 Internet access service on the ONT, but you need to

only enable the Layer 2 service channels between the OLT and ONT. This topic describes only

how to configure the Layer 3 Internet access service.

Every data change must be saved. You can click

Save

in a window to save data changes. If you

navigate to another node without saving data changes, a dialog box will be displayed prompting

you to save the data changes. In this case, click

YES

in the dialog box. New data will be

automatically applied to the ONTs after the data changes are saved.

CAUTION

When configuring services on the U2560, do not modify the WAN interface connecting the

U2560 and the ONT. Otherwise, the U2560 loses communication with the ONT.

Procedure

Step 1

Log in to the U2560 and choose

Subnet View

>

TR069 Subnet

from the navigation tree. In the

terminal list, right-click an ONT and choose

Tools

>

Configure in Real Time

from the shortcut

menu.

Step 2

In the

Configure in Real Time

dialog box, set

Root Node

to

Internet gateway device

.

Step 3

Configure the working mode of a LAN port.

Choose

InternetGatewayDevice

>

LANDevice

>

1

>

LANEthernetInterfaceConfig

>

1

from

the navigation tree. In the right pane, set

X_HW_L3Enable

to

1

, indicating that port LAN1

works in the L3 mode.

3 Configuration

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3-208

Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Page 247 / 358

NOTE

l

When

X_HW_L3Enable

is set to

0

, it indicates that the corresponding LAN port works in the L2

mode.

l

When

X_HW_L3Enable

is set to

1

, it indicates that the corresponding LAN port works in the L3

mode.

By default,

X_HW_L3Enable

is set to

0

.

Step 4

Configure the parameters of the WAN interface.

1.

Choose

InternetGatewayDevice

>

WANDevice

>

1

>

WANConnectionDevice

from the

navigation tree. Click

Add

in the lower left part to create an instance.

2.

Choose

2

>

WANPPPConnection

from the navigation tree and click

Add

in the lower left

part. Choose the new

1

branch from the navigation tree. In the right pane, set parameters

as follows:

l

Set

Enable

to

1

, indicating that the WAN connection is enabled.

l

Set

Connection Type

to

IP_Routed

, indicating that the connection type of the WAN

interface is in routing mode.

l

Set

NATEnable

to

1

, indicating that the NAT function is enabled.

l

Set

Username

to

iadtest@pppoe

and

Password

to

iadtest

, indicating that the PPPoE

user name is

iadtest@pppoe

and the password is

iadtest

.

l

Set

X_HW_SERVICELIST

to

INTERNET

, indicating that the WAN interface

provides Internet access.

l

Set

X_HW_VLAN

to

10

, indicating the VLAN ID of the WAN interface is 10.

l

Set

X_HW_PRI

to

1

, indicating the priority level of the WAN interface is 1.

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3 Configuration

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

3-209

Page 248 / 358

NOTE

l

If the WAN interface obtains IP addresses in static or DHCP mode, choose

WANIPConnection

to

set the parameters of the WAN interface.

l

If the WAN interface obtains IP addresses in PPPoE mode, choose

WANPPPConnection

to set the

parameters of the WAN interface.

Step 5

Bind a LAN port.

Choose

1X_HW_LANBIND

from the navigation tree. In the right pane, set

Lan1Enable

to

1

to bind the WAN interface to LAN port 1.

3 Configuration

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3-210

Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Page 249 / 358

Step 6

Click

OK

after the configuration.

----End

Result

l

Layer 2 Internet access service: The PPPoE dialup is performed on the PC. After the dialup

is successfully performed, the user can access the Internet.

l

Layer 3 Internet access service: The PC is configured to obtain the IP addresses

automatically. After the PPPoE dialup is successfully performed on the ONT, the PC can

automatically obtain the IP addresses allocated by the ONT, and the user can access the

Internet.

3.5.4 Configuring SIP-based Voice Service Through the U2560

This topic provides an example of how to configure the SIP-based voice service through the

U2560.

Prerequisite

l

The Layer 2 service channels between the OLT and ONTs are enabled by running the OLT

commands. For details, see

3.4.1.1 Enabling Layer 2 Service Channels Between an OLT

and a GPON ONT (on the OLT CLI)

.

l

The ONT is auto discovered on the U2560. For details, see

3.5.1.1 Commissioning

Interoperation Between the U2560 and the ONT Through the Web Page

.

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3 Configuration

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

3-211

Page 250 / 358

l

Two telephone sets must be available and each must be connected to ports TEL1 and TEL2

respectively on the ONT.

Context

Every data change must be saved. You can click

Save

in a window to save data changes. If you

navigate to another node without saving data changes, a dialog box will be displayed prompting

you to save the data changes. In this case, click

YES

in the dialog box. New data will be

automatically applied to the ONTs after the data changes are saved.

CAUTION

When configuring services on the U2560, do not modify the WAN interface connecting the

U2560 and the ONT. Otherwise, the U2560 loses communication with the ONT.

Procedure

Step 1

Log in to the U2560 and choose

Subnet View

>

TR069 Subnet

from the navigation tree. In the

terminal list, right-click an ONT and choose

Tools

>

Configure in Real Time

from the shortcut

menu.

Step 2

In the

Configure in Real Time

dialog box, set

Root Node

to

Internet gateway device

.

Step 3

Configure the parameters of the voice WAN interface.

1.

Choose

InternetGatewayDevice

>

WANDevice

>

1

>

WANConnectionDevice

from the

navigation tree. Click

Add

in the lower left part to create an instance.

2.

Choose

2

>

WANIPConnection

from the navigation tree. Click

Add

in the lower left part.

Choose

1

from the navigation tree. In the right pane, set the parameters as follows:

l

Set

Enable

to

1

, indicating that the WAN connection is enabled.

l

Set

Connection Type

to

IP_Routed

, indicating that the connection type of the WAN

interface is in routing mode.

l

Set

Addressing Type

to

DHCP

, indicating that the WAN interface obtains IP addresses

in DHCP mode.

l

Set

X_HW_SERVICELIST

to

VOIP

, indicating that the WAN interface provides the

VoIP access service.

l

Set

X_HW_VLAN

to

20

, indicating the VLAN ID of the WAN interface is 20.

l

Set

X_HW_PRI

to

6

, indicating that the priority level of the WAN interface is 6.

NOTE

l

If the WAN interface obtains IP addresses in static or DHCP mode, choose

WANIPConnection

to

set parameters of the voice WAN interface.

l

If the WAN interface obtains IP addresses in PPPoE mode, choose

WANPPPConnection

to set

parameters of the voice WAN interface.

3 Configuration

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3-212

Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share