Huawei HG8247H Router Manual PDF (Setup & Configuration Guide)

Page 256 / 358 Scroll up to view Page 251 - 255

Step 8

Click

OK

after the configuration.

----End

Result

l

User 1 with telephone number

88001234

can call user 2 with telephone number

88001235

, and the communication between them is normal. The communication is also

normal for user 2's calling user 1.

l

Check whether the voice communication between users using different ONTs is normal.

3.5.5 Configuring the H.248-based Voice Service Through the U2560

This topic provides an example of how to configure the H.248-based voice service through the

U2560.

Prerequisite

l

The Layer 2 service channels between the OLT and ONTs are enabled by running the OLT

commands. For details, see

3.4.1.1 Enabling Layer 2 Service Channels Between an OLT

and a GPON ONT (on the OLT CLI)

.

l

The ONT is auto discovered on the U2560. For details, see

3.5.1.1 Commissioning

Interoperation Between the U2560 and the ONT Through the Web Page

.

l

Two telephone sets must be available and each must be connected to ports TEL1 and TEL2

respectively on the ONT.

3 Configuration

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3-218

Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Page 257 / 358

Context

Every data change must be saved. You can click

Save

in a window to save data changes. If you

navigate to another node without saving data changes, a dialog box will be displayed prompting

you to save the data changes. In this case, click

YES

in the dialog box. New data will be

automatically applied to the ONTs after the data changes are saved.

CAUTION

When configuring services on the U2560, do not modify the WAN interface connecting the

U2560 and the ONT. Otherwise, the U2560 loses communication with the ONT.

Procedure

Step 1

Log in to the U2560 and choose

Subnet View

>

TR069 Subnet

from the navigation tree. In the

terminal list, right-click an ONT and choose

Tools

>

Configure in Real Time

from the shortcut

menu.

Step 2

In the

Configure in Real Time

dialog box, set

Root Node

to

Internet gateway device

.

Step 3

Configure the parameters of the voice WAN interface.

1.

Choose

InternetGatewayDevice

>

WANDevice

>

1

>

WANConnectionDevice

from the

navigation tree. Click

Add

in the lower left part to create an instance.

2.

Choose

2

>

WANIPConnection

from the navigation tree. Click

Add

in the lower left part.

Choose

1

from the navigation tree. In the right pane, set the parameters as follows:

l

Set

Enable

to

1

, indicating that the WAN connection is enabled.

l

Set

Connection Type

to

IP_Routed

, indicating that the connection type of the WAN

interface is in routing mode.

l

Set

Addressing Type

to

DHCP

, indicating that the WAN interface obtains IP addresses

in DHCP mode.

l

Set

X_HW_SERVICELIST

to

VOIP

, indicating that the WAN interface provides the

VoIP access service.

l

Set

X_HW_VLAN

to

20

, indicating the VLAN ID of the WAN interface is 20.

l

Set

X_HW_PRI

to

6

, indicating that the priority level of the WAN interface is 6.

NOTE

l

If the WAN interface obtains IP addresses in static or DHCP mode, choose

WANIPConnection

to

set parameters of the voice WAN interface.

l

If the WAN interface obtains IP addresses in PPPoE mode, choose

WANPPPConnection

to set

parameters of the voice WAN interface.

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3 Configuration

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

3-219

Page 258 / 358

Step 4

Configure the voice protocol parameters.

Choose

InternetGatewayDevice

>

Services

>

VoiceService

>

1

>

VoiceProfile

>

1

from the

navigation tree. In the right pane, set the parameters as follows:

l

Set

SignalingProtocol

to

H248

, indicating that the H.248 protocol is used.

l

Set

Region

to

CN

, indicating the country code of China.

l

Set

X_HW_PortName

to

wan2

, indicating that the new WAN interface 2 is bound.

3 Configuration

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3-220

Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Page 259 / 358

Step 5

Configure the H.248 service parameters.

Choose

InternetGatewayDevice

>

Services

>

VoiceService

>

1

>

VoiceProfile

>

1

>

X_HW_H248

from the navigation tree. In the right pane, set the parameters as follows:

l

Set

CallAgent1

to

200.200.200.200

, indicating that the IP address of the MGC server is

200.200.200.200.

l

Set

Domain

to

6877687714852901

, indicating that the MG registration address is

68776877148529010016ECC54B80

.

NOTE

Domain

is ONT's domain name registered on the MGC. It is globally unique.

Domain

in this example is

ONT's SN.

l

Set

MIDFormat

to

DomainName

, indicating that the MG uses its domain name to register.

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3 Configuration

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

3-221

Page 260 / 358

Step 6

Configure the TIDs of H.248 voice users.

1.

Choose

InternetGatewayDevice

>

Services

>

VoiceService

>

1

>

VoiceProfile

>

1

>

Line

>

1

>

X_HW_H248

from the navigation tree. In the right pane, set

LineName

to

A0

, indicating that the TID of H.248 voice user 1 is A0. The user telephone number set on

the MGC is 88001234.

3 Configuration

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3-222

Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share