Page 241 / 358
Scroll up to view Page 236 - 240
Parameter
Data
Description
User name of a
requested
connection
server
It must be the same as that planned on the U2560.
Password of a
requested
connection
server
It must be the same as that planned on the U2560.
Flowchart
Figure 3-9
shows the flowchart for commissioning interoperation between the U2560 and the
ONT through the Web page.
Figure 3-9
Flowchart for commissioning interoperation between the U2560 and the ONT
through the Web page
Procedure
Step 1
Configure the parameters of the WAN interface.
1.
In the navigation tree on the left, choose
WAN
>
WAN Configuration
.
2.
In the pane on the right, click
New
. In the dialog box that is displayed, configure the
parameters of the WAN interface as follows:
l
WAN Connection: Enable
l
Service List: TR069
l
Mode: Route
l
VLAN ID: 50
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3 Configuration
Issue 04 (2011-01-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-203
Page 242 / 358
l
802.1p: 6
l
IP Acquisition Mode: DHCP
3.
Click
Apply
to apply the configuration.
Step 2
Configure the TR-069 parameters.
1.
In the navigation tree on the left, choose
System Tools
>
TR-069
.
2.
In the pane on the right, set the TR-069 client parameters (other parameters use the default
values) as follows:
l
l
Connection Request User Name: server
l
Connection Request Password: server
3.
Click
Apply
to apply the configuration.
Step 3
Save the configuration.
Choose
System Tools
>
Configuration File
from the navigation tree. In the right pane, click
Save Configuration
.
3 Configuration
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3-204
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2011-01-12)
Page 243 / 358
Step 4
Confirm the ONT.
Log in to the TR-069 server and then choose
Subnet view
>
TR-069 Subnet
from
WLAN and
Home Network View
in the navigation tree on the left. In the pane on the right, right-click and
choose
Refresh
from the shortcut menu. The reported ONT list is displayed. Then, select the
ONT list, right-click, and choose
Confirm
from the shortcut menu.
----End
Result
On the U2560, you can configure ONT services. For details, see the configuration examples.
3.5.2 Data Plan
This topic plans the data in a unified manner for various example networks of connecting ONTs
in the FTTH GPON access mode. Subsequent examples are configured based on the following
data plan.
Table 3-15
shows the unified data plan for the HSI service, VoIP service and Wi-Fi service in
an FTTH network.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3 Configuration
Issue 04 (2011-01-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-205
Page 244 / 358
Table 3-15
Data plan for connecting ONTs in the FTTH GPON access mode
Configurat
ion Item
Data Item
Detailed Data
Remarks
WAN port
data
HSI service
(Layer 3
routing)
l
Service type: Internet
l
Connection mode: routing
l
VLAN ID: 10
l
IP address obtainment
mode: PPPoE (user name:
iadtest@pppoe, password:
iadtest)
l
802.1p: 1
l
NAT function: enable
l
Bound port: LAN1 (LAN1 is
a Layer 3 LAN)
l
For configuring HSI
service or Wi-Fi
service, Internet or a
combination
containing Internet
must be selected as the
service type. For
configuring VoIP
service, VoIP or a
combination
containing VoIP must
be selected as the
service type.
l
The VLAN ID of the
ONT must be the same
as the user-side VLAN
ID configured on the
OLT.
l
PPPoE must use the
same user name and
password as the upper-
layer BRAS.
l
The HSI service
involves the Layer 2,
Layer 3 bridge and
Layer 3 routing modes.
In the Layer 2 mode, all
configurations are
required only on the
OLT. The application
mode of the Layer 3
bridge mode is similar
to the Layer 2 mode. It
is recommended that
you use the Layer 2
mode.
l
The Wi-Fi service does
not support the Layer 2
mode.
VoIP service
l
Service type: VoIP
l
Connection mode: routing
l
VLAN ID: 20
l
IP address obtaining mode:
DHCP
l
802.1p: 6
Wi-Fi
service
(Layer 3
bridge)
l
Service type: Internet (not
configurable)
l
Connection mode: bridge
l
VLAN ID: 40
l
802.1p: 1
l
Bound port: SSID1
Wi-Fi
service
(Layer 3
routing)
l
Service type: Internet
l
Connection mode: routing
l
VLAN ID: 40
l
IP address Obtainment
mode: PPPoE (user name:
iadtest@pppoe, password:
iadtest)
l
802.1p: 1
l
NAT function: enable
l
Bound port: SSID1
3 Configuration
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3-206
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2011-01-12)
Page 245 / 358
Configurat
ion Item
Data Item
Detailed Data
Remarks
VoIP service
data
SIP
parameters
l
IP address of the primary
server: 200.200.200.200
l
Port ID of the primary
server: 5060
l
Home domain name:
softx3000.huawei.com
l
Digitmap: x.S|x.# (Default)
l
User 1:
–
Phone number:
88001234
–
Authentication user
name:
uawei.com
–
Password: iadtest1
l
User 2:
–
Phone number:
88001235
–
Authentication user
name:
uawei.com
–
Password: iadtest2
The software version that
supports SIP is
V100R002C00.
H.248
parameters
l
Primary MGC address:
200.200.200.200
l
Primary MGC port: 2944
l
MID format: domain name
l
MG domain name:
6877687714852901
l
TID: A0 and A1
The software version that
supports H.248 is
V100R002C01.
Wi-Fi
service
SSID1
ChinaNet-huawei
-
Security
mode
WPA Pre-Shared Key
WPA
encryption
mode
l
TKIP&AES
l
Key: chinahuawei
3.5.3 Configuring the Internet Access Service Through the U2560
This topic provides an example of how to configure the Internet access service through the
U2560.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3 Configuration
Issue 04 (2011-01-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-207
19216811.live