Huawei HG8247H Router Manual PDF (Setup & Configuration Guide)

Page 221 / 358 Scroll up to view Page 216 - 220

Configurat

ion Item

Data Item

Detailed Data

Remarks

H.248

parameters

l

Primary MGC address:

200.200.200.200

l

Primary MGC port: 2944

l

MID format: domain name

l

MG domain name:

6877687714852901

l

TID: A0 and A1

The software version that

supports H.248 is

V100R002C01.

Wi-Fi

service

SSID1

ChinaNet-huawei

-

Security

mode

WPA Pre-Shared Key

WPA

encryption

mode

l

TKIP&AES

l

Key: chinahuawei

3.4.3 Locally Logging in to the Web Interface

This topic describes the data plan and procedure for logging in to the Web configuration

interface.

Context

Before setting up the configuration environment, ensure that data information listed in

Table

3-13

is available.

Table 3-13

Data plan

Item

Description

User name and password

Default settings:

l

Administrator:

–

User name: telecomadmin

–

Password: admintelecom

l

Common user:

–

User name: root

–

Password: admin

LAN IP address and subnet mask

Default settings:

l

IP address: 192.168.100.1

l

Subnet mask: 255.255.255.0

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3 Configuration

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

3-183

Page 222 / 358

Item

Description

IP address and subnet mask of the PC

Configure the IP address of the PC to be in

the same subnet as the LAN IP address of the

HG8240/HG8245/HG8247.

For example:

l

IP address: 192.168.100.100

l

Subnet mask: 255.255.255.0

Procedure

Step 1

Use a network cable to connect the LAN port of the HG8240/HG8245/HG8247 to a PC.

Step 2

Ensure that the Internet Explorer (IE) of the PC does not use the proxy server. The following

section considers IE 6.0 as an example to describe how to check whether the IE uses the proxy

server.

1.

Start the IE, and choose

Tools

>

Internet Options

from the main menu of the IE window.

Then, the

Internet Options

interface is displayed.

2.

In the

Internet Options

interface, click the

Connections

tab, and then click

LAN

settings

.

3.

In the

Proxy server

area, ensure that the

Use a proxy server for your LAN (These settings

will not apply to dial-up or VPN connections).

check box is not selected (that is, without

the "

√

" sign). If the check box is selected, deselect it, and then click

OK

.

Step 3

Set the IP address and subnet mask of the PC. For details, see

Table 3-13

.

Step 4

Log in to the Web configuration interface.

1.

Enter

http://192.168.100.1

in the address bar of IE (192.168.100.1 is the default IP address

of the HG8240/HG8245/HG8247), and then press

Enter

to display the login interface, as

shown in

Figure 3-8

.

Figure 3-8

Login interface

2.

In the login interface, enter the use name and password, and select your preferred language.

For details about default settings of the user name and password, see

Table 3-13

. After the

password authentication is passed, the Web configuration interface is displayed.

----End

3 Configuration

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3-184

Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Page 223 / 358

3.4.4 Configuring the Internet Access Service on the Web Page

This topic provides an example of how to configure the Internet access service on the Web page.

Prerequisite

l

The Layer 2 service channels between the OLT and ONTs are enabled by running the OLT

commands. For details, see

3.4.1.1 Enabling Layer 2 Service Channels Between an OLT

and a GPON ONT (on the OLT CLI)

.

l

You have established the environment for logging in to the Web page for service

configuration and have successfully logged in to the Web page. For details, see

3.4.3

Locally Logging in to the Web Interface

.

l

The user-side PC must be connected with the LAN port of an ONT by using network cables.

Context

The Internet access service includes the Layer 2 Internet access service and Layer 3 Internal

access service.

l

Layer 2 Internet access service: The PPPoE dialup is performed on the PC. The IP address

is allocated by the upper-layer BRAS. The ONT is connected to the OLT and then to the

upper-layer network in the Layer 2 mode to provide the high-speed Internet access service.

l

Layer 3 Internet access service: The PPPoE auto dialup is performed on the ONT. The IP

address is allocated by the DHCP IP address pool on the ONT. The ONT is connected to

the OLT and then to the upper-layer network in the Layer 3 mode to provide the high-speed

Internet access service.

You do not need to configure the Layer 2 Internet access service on the ONT, but you need to

only enable the Layer 2 service channels between the OLT and ONT. This topic describes only

how to configure the Layer 3 Internet access service.

Procedure

Step 1

Configure the working mode of a LAN port.

1.

In the navigation tree, choose

LAN

>

LAN Port Work Mode

. Select the check box of

LAN 1 and set LAN1 to work in the Layer 3 mode.

2.

Click

Apply

to apply the configuration.

Step 2

Configure parameters of a WAN port.

1.

In the navigation tree, choose

WAN

>

WAN Configuration

.

2.

In the right pane, click

New

. In the dialog box that is displayed, configure parameters of a

WAN port as follows:

l

WAN Connection: Enable

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3 Configuration

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

3-185

Page 224 / 358

l

Service List: INTERNET (For configuring the Internet access service,

INTERNET

or

a combination containing

INTERNET

needs to be selected.)

l

Mode: Route

l

VLAN ID: 10 (The VLAN ID of the ONT must be the same as the user-side VLAN ID

configured on the OLT.)

l

802.1p: 1

l

IP Acquisition Mode: PPPoE

l

NAT: Enable (NAT must be enabled to configure the Internet access service.)

l

User Name: iadtest@pppoe, Password: iadtest (The user name and password must be

the same as the user name and password configured on the BRAS.)

l

Binding options: LAN1

3.

Click

Apply

to apply the configuration.

Step 3

Save the configuration.

Choose

System Tools

>

Configuration File

from the navigation tree. In the right pane, click

Save Configuration

.

3 Configuration

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3-186

Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Page 225 / 358

Step 4

Check the ONT connection status.

In the navigation tree, choose

Status

>

WAN Information

. In the right pane,

Status

is

Connected

and the obtained IP address is displayed at

IP

.

----End

Result

l

Layer 2 Internet access service: The PPPoE dialup is performed on the PC. After the dialup

is successfully performed, the user can access the Internet.

l

Layer 3 Internet access service: The PC is configured to obtain the IP addresses

automatically. After the PPPoE dialup is successfully performed on the ONT, the PC can

automatically obtain the IP addresses allocated by the ONT, and the user can access the

Internet.

3.4.5 Configuring the SIP-based Voice Service on the Web Page

This topic provides an example of how to configure the SIP-based voice service on the Web

page.

Prerequisite

l

The Layer 2 service channels between the OLT and ONTs are enabled by running the OLT

commands. For details, see

3.4.1.1 Enabling Layer 2 Service Channels Between an OLT

and a GPON ONT (on the OLT CLI)

.

l

You have established the environment for logging in to the Web page for service

configuration and have successfully logged in to the Web page. For details, see

3.4.3

Locally Logging in to the Web Interface

.

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3 Configuration

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

3-187

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share