Huawei HG8247H Router Manual PDF (Setup & Configuration Guide)

Page 236 / 358 Scroll up to view Page 231 - 235

–

VLAN ID: 40 (The VLAN ID of the ONT must be the same as the user-side

VLAN ID configured on the OLT.)

–

802.1p: 1

–

Bridge Type: PPPoE_Bridged

–

Binding options: SSID1

NOTE

When you use Wi-Fi access service in the PPPoE mode, if DHCP is used, you need to set

Bridge Type

to

IP_Bridged

and enable the DHCP relay function. For procedure details, see

5.3.3 DHCP Server Configuration

.

(3)

Click

Apply

to apply the configuration.

3.

Save the configuration.

Choose

System Tools

>

Configuration File

from the navigation tree. In the right

pane, click

Save Configuration

.

4.

Check the ONT connection status.

In the navigation tree, choose

Status

>

WAN Information

. In the right pane,

User

Status

is

Connected

.

3 Configuration

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3-198

Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Page 237 / 358

l

Layer 3 route Wi-Fi service

1.

Configure the Wi-Fi parameters.

(1)

In the navigation tree, choose

Wi-Fi

>

Wi-Fi Basic Configuration

.

(2)

Select

Enable Wireless

to enable the Wi-Fi function. Then, set the parameters

as follows:

–

SSID: ChinaNet-huawei

–

Authentication Mode: WPA Pre-Shared Key

–

Encryption Mode: TKIP&AES

–

WPA PreSharedKey: chinahuawei

(3)

Click

Apply

to apply the configuration.

2.

Configure the parameters of the Layer 3 route WAN port.

(1)

In the navigation tree, choose

WAN

>

WAN Configuration

.

(2)

In the right pane, click

New

. In the dialog box that is displayed, configure the

parameters of the Layer 3 route WAN port as follows:

–

WAN Connection: Enable

–

Service List: INTERNET (For configuring the Internet access service,

INTERNET or a combination containing INTERNET needs to be selected.)

–

Mode: Route

–

VLAN ID: 40 (The VLAN ID of the ONT must be the same as the user-side

VLAN ID configured on the OLT.)

–

802.1p: 1

–

IP Acquisition Mode: PPPoE

–

NAT: Enable

–

User Name: iadtest@pppoe, Password: iadtest (The user name and password

must be the same as the user name and password configured on the BRAS.)

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3 Configuration

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

3-199

Page 238 / 358

–

Binding options: SSID1

(3)

Click

Apply

to apply the configuration.

3.

Save the configuration.

Choose

System Tools

>

Configuration File

from the navigation tree. In the right

pane, click

Save Configuration

.

4.

Check the ONT connection status.

In the navigation tree, choose

Status

>

WAN Information

. In the right pane,

Status

is

Connected

and the obtained IP address is displayed at

IP

.

----End

3 Configuration

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3-200

Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Page 239 / 358

Result

l

Layer 3 bridge Wi-Fi service: SSID radio signals can be searched on the PC. After the user

enter the authentication key and pass the authentication, the user can access the Internet.

l

Layer 3 route Wi-Fi service: SSID radio signals can be searched on the PC. After the user

enter the authentication key and pass the authentication, the PC can obtain the IP address

allocated by the DHCP IP address pool on the ONT. After the PPPoE dialup is successfully

performed on the ONT, the user can access the Internet.

NOTE

The security mode and encryption configured on a Wi-Fi terminal must be the same as those of an ONT. If you

cannot find the following encryption modes: TKIP&AES, and AES. The reason may lie in an old Wi-Fi driver

version. If so, replace the old version with a new one.

3.5 Configuring the Service by Using U2560

This topic describes how to configure the Internet access service, VoIP service and Wi-Fi service

by using U2560.

3.5.1 Preparations

Before configuring services on the U2560, plan data of the entire network in a unified manner

and add the ONT to the U2560.

3.5.2 Data Plan

This topic plans the data in a unified manner for various example networks of connecting ONTs

in the FTTH GPON access mode. Subsequent examples are configured based on the following

data plan.

3.5.3 Configuring the Internet Access Service Through the U2560

This topic provides an example of how to configure the Internet access service through the

U2560.

3.5.4 Configuring SIP-based Voice Service Through the U2560

This topic provides an example of how to configure the SIP-based voice service through the

U2560.

3.5.5 Configuring the H.248-based Voice Service Through the U2560

This topic provides an example of how to configure the H.248-based voice service through the

U2560.

3.5.6 Configuring the Wi-Fi Access Service Through the U2560

This topic provides an example of how to configure the Wi-Fi access service through the TR-069

server.

3.5.1 Preparations

Before configuring services on the U2560, plan data of the entire network in a unified manner

and add the ONT to the U2560.

3.5.1.1 Commissioning Interoperation Between the U2560 and the ONT Through the Web Page

To configure and issue ONT services using the U2560, you need to add the ONT on the U2560

so that the U2560 can manage the ONT.

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3 Configuration

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

3-201

Page 240 / 358

3.5.1.1 Commissioning Interoperation Between the U2560 and the ONT Through

the Web Page

To configure and issue ONT services using the U2560, you need to add the ONT on the U2560

so that the U2560 can manage the ONT.

Prerequisite

Before adding an ONT to the U2560, ensure that Layer 2 service channels between the OLT and

the ONT are enabled and the management traffic stream on the U2560 are created. For details,

see

3.4.1.1 Enabling Layer 2 Service Channels Between an OLT and a GPON ONT (on the

OLT CLI)

.

Data Plan

Table 3-14

provides the data plan for commissioning interoperation between the U2560 and the

ONT through the Web page.

Table 3-14

Data plan for commissioning interoperation between the U2560 and the ONT

through the Web page

Parameter

Data

Description

Service type of

the WAN

interface

TR069

When configuring the U2560 management channel,

you need to select only TR069 or a combination with

TR069. In this example, TR069 is selected.

Connection

mode

Route

-

VLAN ID of the

WAN interface

50

The VLAN ID of the WAN interface must be the

same as the CVLAN ID configured on the OLT.

Mode of

obtaining an IP

address

DHCP

There are three modes to obtain an IP address:

l

DHCP: Obtain an IP address dynamically.

l

Static: Configure an IP address manually.

l

PPPoE: Access in the PPPoE dialup mode.

In this example, the DHCP mode is configured. You

can also select the static or PPPoE mode according

to the data plan of the upper-layer network.

ACS URL

http://

10.11.11.1:9070

It can be the IP address, port ID, domain name of the

ACS server.

Periodical

notification

interval

43200

It is the default value of the system.

ACS user name

hgw

It is the default value of the system.

ACS password

hgw

It is the default value of the system.

3 Configuration

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3-202

Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share