Page 136 / 429 Scroll up to view Page 131 - 135
3.3 Configuration by Using OLT Commands
This topic describes how to configure the Internet access service, VoIP service and IPTV service
by using OLT commands.
3.3.1 Data Plan
This topic plans the data in a unified manner for connecting to the OLT in the FTTH GPON
access mode for various example networks. The subsequent examples are configured based on
the following data plan.
Data Plan
Table 3-4
provides the unified data plan for configuring the HSI, IPTV, and VoIP services in
an FTTH network.
Table 3-4
Data plan for the FTTH GPON access
Service
Classificati
on
Item
Data
Remarks
Network
data
FTTH
l
OLT PON port: 0/1/1
l
ONT ID: 1-2
-
Service
VLAN
HSI service
l
SVLAN: 100
l
CVLAN: 10
-
IPTV service
l
Multicast VLAN: 1000
l
SVLAN: 1000
l
CVLAN: 30
Generally, multicast
VLANs are divided
according to
multicast sources.
VoIP service
l
SVLAN: 200
l
CVLAN: 20
-
QoS
(priority)
HSI service
Priority: 1; queue scheduling:
WRR
l
Generally, the
QoS priorities
are VoIP service
> IPTV service >
Internet access
service in a
descending
order.
l
Generally, the
priority is set on
the ONT, and the
OLT inherits the
priority set on
the ONT.
IPTV service
Priority: 4; queue scheduling:
WRR
VoIP service
Priority: 6; queue scheduling:
PQ
EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON
Terminal
Service Manual
3 Configuration
Issue 01 (2011-10-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
128
Page 137 / 429
Service
Classificati
on
Item
Data
Remarks
QoS (DBA)
HSI service
l
Profile type: Type4
l
Maximum bandwidth: 100
Mbit/s
l
T-CONT ID: 4
l
DBA is used to
control the
upstream
bandwidth of the
ONT. DBA
profiles are
bound to
TCONTs.
Different
TCONTs are
planned for
different
bandwidth
assurance types.
l
Generally, the
service with a
high priority
adopts a fixed
bandwidth or an
assured
bandwidth, and
the service with a
low priority
adopts the
maximum
bandwidth or
best effort.
IPTV service
l
Profile type: Type4
l
Maximum bandwidth: 60
Mbit/s
l
T-CONT ID: 3
VoIP service
l
Profile type: Type3
l
Assured bandwidth: 15
Mbit/s
l
Maximum bandwidth: 30
Mbit/s
l
T-CONT ID: 2
QoS (CAR)
HSI service
Upstream and downstream
bandwidth: 4 Mbit/s
l
Traffic control
can be
implemented on
the BRAS, or on
the OLT or ONT
by using port rate
limitation or
using a traffic
profile to limit
the upstream and
downstream
traffic.
l
Generally, in the
case of FTTH,
limit the rate on
the OLT.
IPTV service
No rate limitation in the
upstream and downstream
directions
VoIP service
No rate limitation in the
upstream and downstream
directions
IPTV
service data
Multicast protocol
l
OLT: IGMP proxy
l
ONT: IGMP snooping
-
EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON
Terminal
Service Manual
3 Configuration
Issue 01 (2011-10-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
129
Page 138 / 429
Service
Classificati
on
Item
Data
Remarks
Multicast version
IGMP V3
IGMP v3 and IGMP
v2 are supported,
and IGMP v3 is
compatible with
IGMP v2.
Multicast program
configuration mode
Static configuration mode
The OLT can also
generate a multicast
program library,
that is, dynamically
generate a program
list according to the
programs requested
by users. In this
mode, the program
list need not be
configured or
maintained;
however, the
functions such as
program
management, user
multicast bandwidth
management,
program preview,
and program prejoin
are not supported.
IP address of the
multicast server
10.10.10.10
-
Multicast program
224.1.1.10
-
VoIP service
data
MG interface (H.
248)
NOTE
The parameters of the
MG interface must be
the same as the
parameters on the
MGC. H.248 has
many negotiation
parameters, and the
parameters here are
mandatory.
IP address of the primary MGC
to which the MG interface
belongs: 200.200.200.200/24
When dual homing
is configured, the IP
address and the port
ID of the secondary
MGC must also be
configured.
Port ID of the primary MGC to
which the MG interface
belongs: 2944
l
MID format: domain name
l
MG domain name:
6877687714852901
Domain name is
globally unique.
This example uses
ONT's SN as the
domain name.
TID: A0 and A1
The phone numbers
of terminals A0 and
A1 are 88001234
and 88001235.
EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON
Terminal
Service Manual
3 Configuration
Issue 01 (2011-10-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
130
Page 139 / 429
Service
Classificati
on
Item
Data
Remarks
SIP interface (SIP)
NOTE
The parameters of the
SIP interface must be
the same as the
parameters on the
softswitch. SIP has
many negotiation
parameters, and the
parameters here are
mandatory.
IP address of the primary
softswitch to which the SIP
interface belongs:
200.200.200.200/24
When dual homing
is configured, the IP
address and the port
ID of the secondary
softswitch must also
be configured.
Port ID of the primary
softswitch to which the SIP
interface belongs: 5060
Home domain of the SIP
interface:
softx3000.huawei.com
-
Digitmap: x.S|x.# (Default)
-
User 1:
l
Phone number: 88001234
l
Authentication user name:
wei.com
l
Password: iadtest1
User 2:
l
Phone number: 88001235
l
Authentication user name:
wei.com
l
Password: iadtest2
-
3.3.2 Configuring the GPON FTTH Layer 2 Internet Access Service
on the OLT CLI
The OLT is connected to the remote ONT through a GPON port to provide users with the high-
speed Internet access service.
Service Requirements
l
The user PC is connected to the ONT through the LAN port in the PPPoE dialing mode.
The ONT is connected to the OLT and then to the upper-layer network in the GPON mode
to provide the high-speed Internet access service.
l
The high-speed Internet access service is identified by two precisely-bound VLAN tags.
On the ONT, each user is allocated with a CVLAN; on the OLT, each slot is allocated with
an SVLAN.
EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON
Terminal
Service Manual
3 Configuration
Issue 01 (2011-10-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
131
Page 140 / 429
l
The high-speed Internet access service adopts a bandwidth-ensured mode with the
maximum bandwidth 100 Mbit/s as the DBA profile and performs the 4 Mbit/s rate
limitation on both the upstream and downstream directions.
Table 3-5
Data Plan
Item
Data
OLT
Service VLAN ID: 100
Service VLAN type: Smart
Service VLAN attribute: stacking
Upstream port: 0/19/0
ONT
ONT IDs: 1 and 2
ID of the port on the ONT that is connected to the PC: 1
Type of the port on the ONT that is connected to the PC:
ETH
VLAN ID of the port on the ONT that is connected to the
PC: 10
Prerequisite
l
The OLT is connected to the BRAS.
l
Related configurations are performed on the BRAS according to the authentication and
accounting requirements for dialup users. For details about the configuration, see the
corresponding configuration guide.
l
The VLAN of the LAN switch port connected to the OLT is the same as the upstream
VLAN of the OLT.
Procedure
l
Configure the OLT.
1.
Create a service VLAN and add an upstream port to it.
The VLAN ID is 100, and the VLAN is a smart VLAN, VLAN attribute is stacking.
Add upstream port 0/19/0 to VLAN 100.
huawei(config)#
vlan 100 smart
huawei(config)#
vlan attrib 100 stacking
huawei(config)#
port vlan 100 0/19 0
2.
(Optional) Configure upstream link aggregation.
In this example, a single upstream port is used. In the case of multiple upstream ports,
upstream link aggregation can be configured. For details, see Configuring Upstream
Link Aggregation.
3.
Configure GPON ONT profiles.
GPON ONT profiles include the DBA profile, line profile, service profile, and alarm
profile.
EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON
Terminal
Service Manual
3 Configuration
Issue 01 (2011-10-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
132

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top