Page 126 / 429
Scroll up to view Page 121 - 125
Main Topology, double-click the required OLT in the
Physical Root
navigation tree; or
right-click the required OLT and choose
NE Explorer
from the shortcut menu.
1.
Configure a service VLAN on the OLT side.
A service VLAN is the VLAN used for the multicast service.
(1)
Choose
VLAN
from the navigation tree.
(2)
On the
VLAN
tab page, right-click and choose
Add
from the shortcut menu.
(3)
In the dialog box that is displayed, set the parameters.
–
VLAN ID: 1000
–
Type: Smart VLAN
(4)
Click
Next
. Click the
Upstream Port
tab and add upstream port 0/19/0 as the
upstream port of the VLAN.
(5)
Click
Done
.
2.
Add a service virtual port on the OLT side.
(1)
On the
VLAN
tab page, select the record where
VLAN ID
is set to
1000
and
click the
ServicePort
tab in the lower pane.
(2)
In the information list, right-click and choose
Add
from the shortcut menu.
EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON
Terminal
Service Manual
3 Configuration
Issue 01 (2011-10-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
118
Page 127 / 429
(3)
In the dialog box that is displayed, set the parameters.
–
Name:IGMP
–
VlAN Choice: Smart VLAN
–
Connection Type: LAN-GPON (when the physical port is a GPON port) or
LAN-EPON (when the physical port is an EPON port)
–
Interface Selection: 0/2/1/0/1 (when the connection type is LAN-GPON) or
0/2/1/0 (when the connection type is LAN-EPON)
–
Vlan ID: 1000 (SVLAN ID)
–
Service Type: Multi-Service VLAN
–
User VLAN: 30 (CVLAN ID)
–
Keep the upstream and downstream settings the same: selected
–
Upstream Traffic Name: ip-traffic-table_6 (it is recommended that you use
the default profile ip-traffic-table_6 because the OLT does not limit the rates
of service streams)
(4)
Click
OK
.
3.
Add a multicast VLAN on the OLT side.
(1)
Choose
Multicast
>
Multicast VLAN
from the navigation tree.
(2)
On the
Multicast VLAN
tab page, set the filter criteria to display the required
multicast VLANs.
(3)
In the information list, right-click and choose
Add
from the shortcut menu.
(4)
In the dialog box that is displayed, set the parameters.
–
IGMP Version: IGMP V3
–
Work Mode: igmp_proxy
–
VLAN ID: 1000
EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON
Terminal
Service Manual
3 Configuration
Issue 01 (2011-10-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
119
Page 128 / 429
(5)
Click
Finish
.
4.
Add a virtual upstream port for the multicast service on the OLT side.
(1)
Choose
Multicast
>
Virtual Uplink Port
from the navigation tree.
EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON
Terminal
Service Manual
3 Configuration
Issue 01 (2011-10-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
120
Page 129 / 429
(2)
On the
Virtual Uplink Port
tab page, set the filter criteria to display the required
virtual upstream ports.
(3)
In the information list, right-click and choose
Add
from the shortcut menu.
(4)
In the dialog box that is displayed, set the parameters.
–
VLAN ID: 1000
–
Frame: 0
–
Slot: 19
–
Port: 0
(5)
Click
Done
.
5.
Configure a program profile on the OLT side.
(1)
Choose
Configuration
>
Access Profile Management
from the main menu. In
the dialog box that is displayed, choose
IGMP Profile
from the navigation tree.
(2)
Click the
Program Profile
tab, and select the required device type from the
Device Type
drop-down list.
(3)
Right-click and choose
Add Global Profile
from the shortcut menu.
(4)
In the dialog box that is displayed, set the parameters.
–
Name: program1
–
Start IP Address: 224.0.1.1 (IP address of the multicast program)
–
End IP Address: 224.0.1.1
–
Source IP Address:
10.10.10.20 (IP address of the multicast server)
–
Preview Profile: 0 (the default value)
EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON
Terminal
Service Manual
3 Configuration
Issue 01 (2011-10-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
121
Page 130 / 429
(5)
Click
OK
.
(6)
In the information list, right-click the record and choose
Download to NE
from
the shortcut menu.
(7)
In the dialog box that is displayed, select the required OLT and click
Next
. Then,
set
VLAN ID
to
1000
.
(8)
Click
OK
.
6.
Configure a multicast user on the OLT side.
To enable user authentication, select
Enable Authorization
. To add a rights profile
and apply it to NEs, choose
Configuration
>
Access Profile Management
>
IGMP
Profile
from the main menu and click the
Right Profile
tab.
(1)
Choose
Multicast
>
Multicast User
from the navigation tree.
(2)
In the information list, right-click and choose
Add
from the shortcut menu.
(3)
In the dialog box that is displayed, set the parameters.
–
Alias: IGMPUserA
–
Unlimited Band Width: selected
–
Select Service Port: service virtual port named
IGMP
EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON
Terminal
Service Manual
3 Configuration
Issue 01 (2011-10-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
122
19216811.live