Page 116 / 210 Scroll up to view Page 111 - 115
Section 5, DLP-008
NetVanta 2000 Series System Manual
116
© 2002 ADTRAN, Inc.
61200361L1-1E
5.
Enter the filename (including path) of the firmware file you wish to load. Firmware files for the NetVanta
2000 series will have a
.bin
extension.
Alternately, click the
B
ROWSE
button to navigate to the file using the pop-up explorer window.
Page 117 / 210
NetVanta 2000 Series System Manual
Section 5, DLP-008
61200361L1-1E
© 2002 ADTRAN, Inc.
117
6.
Click the
U
PGRADE
button to begin the upgrade.
7.
Log in to the NetVanta 2000 series using the admin username and appropriate password to continue
configuration.
Follow-up Procedures
Once this procedure is complete, return to the procedure which referred you to this DLP and continue with
the tasks indicated there.
All settings not saved into nonvolatile memory (following the procedures in
DLP-002) will be lost during the firmware upgrade.
During the firmware upgrade, all traffic will be halted through the NetVanta 2000 series.
The unit will reboot and you will be asked to log in again.
Page 118 / 210
Section 5, DLP-008
NetVanta 2000 Series System Manual
118
© 2002 ADTRAN, Inc.
61200361L1-1E
Page 119 / 210
61200361L1-1E
© 2002 ADTRAN, Inc.
119
SAVING THE CURRENT CONFIGURATION OF THE NETVANTA
Introduction
The NetVanta 2000 series supports configuration transfers from the unit (via either the LAN or WAN
interface) using an active browser session.
This DLP provides the steps to follow for a successful
configuration transfer using a PC and an active browser session.
Prerequisite Procedures
This DLP assumes the NetVanta 2000 series is connected to a PC and a browser session is active. Refer to
DLP-001 for more details.
Tools and Materials Required
No special tools or materials required
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Page 120 / 210
Section 5, DLP-009
NetVanta 2000 Series System Manual
120
© 2002 ADTRAN, Inc.
61200361L1-1E
DLP-009
Perform Steps Below in the Order Listed
1.
Log in to the NetVanta 2000 series as
admin
(see DLP-001 for details).
2.
From the main menu (located across the top of the screen) select ADMIN.

Rate

4 / 5 based on 1 vote.

Popular Adtran Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top