Page 126 / 210
Scroll up to view Page 121 - 125
Section 5, DLP-010
NetVanta 2000 Series System Manual
126
© 2002 ADTRAN, Inc.
61200361L1-1E
DLP-010
Perform Steps Below in the Order Listed
1.
Log in to the NetVanta 2000 series as
admin
(see DLP-001 for details).
2.
From the main menu (located across the top of the screen) select ADMIN.
Page 127 / 210
NetVanta 2000 Series System Manual
Section 5, DLP-010
61200361L1-1E
© 2002 ADTRAN, Inc.
127
3.
From the menu list (located on the left side of the screen) select Configuration Transfer.
4.
In the Configuration Upload dialog box either enter the filename of the configuration file you want to
load into the unit (including path), or click the Browse button to open a Windows Choose file dialog box
and select the desired file.
All configuration files for the NetVanta 2000 series must have a .bin
extension.
Page 128 / 210
Section 5, DLP-010
NetVanta 2000 Series System Manual
128
© 2002 ADTRAN, Inc.
61200361L1-1E
5.
In the Configuration Upload dialog box click the Upload button.
If a successful upload is completed,
the unit will display the status message in the Configuration Upload dialog box.
6.
Once the upload is complete the NetVanta 2000 series unit will reboot to install the new configuration.
You will need to log in to the unit after the reboot is complete (see DLP-001 for details).
Follow-up Procedures
Once this procedure is complete, return to the procedure which referred you to this DLP and continue with
the tasks indicated there.
Page 129 / 210
61200361L1-1E
© 2002 ADTRAN, Inc.
129
ADDING A DEFAULT ROUTE TO THE NETVANTA ROUTE TABLE
Introduction
The NetVanta 2000 series contains an internal router which allows multiple users to share a VPN
connection while the unit is still directing incoming IP traffic.
The NetVanta 2000 series router supports
standard TCP/IP operation, static routes, and the use of RIP V1 and V2.
This DLP discusses the procedure
for adding a default route to the NetVanta 2000 series route table.
Prerequisite Procedures
This DLP assumes the NetVanta 2000 series is connected to a PC and a browser session is active. Refer to
DLP-001 for more details.
Tools and Materials Required
•
No special tools or materials required.
If you are using Static IP addressing on your WAN interface your Internet Service
Provider must provide you with the IP address of your first hop router. If you are using
DHCP (Dynamic) or PPPoE addressing, please complete the steps in
DLP-022, Viewing
the DHCP Info Table
before beginning this DLP. You will need to record the IP address
listed next to Gateways in the WAN interface column.
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Page 130 / 210
Section 5, DLP-011
NetVanta 2000 Series System Manual
130
© 2002 ADTRAN, Inc.
61200361L1-1E
DLP-011
Perform Steps Below in the Order Listed - Default Route
1.
Log in to the NetVanta 2000 series as
admin
(see DLP-001 for details).
2.
From the main menu (located across the top of the screen) select
C
ONFIG
.
Network
Broadband
MODEM
Corporate
Network
VPN GW
NetVanta
2100
ROUTER
176.124.37.80
(WAN Address)
10.70.240.1
10.72.280.1
192.22.76.40
(WAN Address)
10.70.240.1
10.10.10.1
(LAN Address)
19216811.live