Page 131 / 210
Scroll up to view Page 126 - 130
NetVanta 2000 Series System Manual
Section 5, DLP-011
61200361L1-1E
© 2002 ADTRAN, Inc.
131
3.
From the menu list (located on the left side of the screen) select
R
OUTES
.
4.
Click the Add Route button found in the Route Table dialog box.
The Routing Information page will
appear.
Page 132 / 210
Section 5, DLP-011
NetVanta 2000 Series System Manual
132
© 2002 ADTRAN, Inc.
61200361L1-1E
5.
Select the interface associated with the new route from the Interface Name drop down menu.
The
options are CORP (the LAN interface) and WAN. Select WAN to add a default route.
6.
Specify whether this route is the default route by selecting the appropriate radio button next to Default
Route. For this example we will be entering the default route so
Y
ES
will be selected.
Page 133 / 210
NetVanta 2000 Series System Manual
Section 5, DLP-011
61200361L1-1E
© 2002 ADTRAN, Inc.
133
7.
Enter the IP address of the far-end network in the Destination IP Address field. For this example we
are entering a default route so the Destination IP Address will be 0.0.0.0.
8.
Enter the subnet mask for the far-end network in the Net Mask field. For this example we are entering
a default route so the Net Mask will be 0.0.0.0.
Page 134 / 210
Section 5, DLP-011
NetVanta 2000 Series System Manual
134
© 2002 ADTRAN, Inc.
61200361L1-1E
9.
If you are using Static IP Addressing on the WAN interface, enter the IP address of the next hop router
(provided by your ISP). Alternately, if you are using DHCP (Dynamic) or PPPoE addressing, enter the
IP address found in the DHCP Info window (see DLP-022 for details).
10.
Enter the number of routers a packet would travel through to reach its destination in the Hop Count
field. This field is optional and will be left blank for this example.
11.
Click the Add Route button to submit the route to the route table.
12.
Follow the procedures in DLP-003 to save the settings to non-volatile memory.
Follow-up Procedures
Once this procedure is complete, return to the procedure which referred you to this DLP and continue with
the tasks indicated there.
Page 135 / 210
61200361L1-1E
© 2002 ADTRAN, Inc.
135
CONFIGURING THE LAN INTERFACE DHCP SERVER
Introduction
The NetVanta 2000 series contains an internal DHCP server to manage IP addresses on the local network.
The DHCP server functions on the LAN interface only. This DLP discusses the procedure for configuring
the DHCP server for standard operation.
Prerequisite Procedures
This DLP assumes the NetVanta 2000 series is connected to a PC and a browser session is active. Refer to
DLP-001 for more details.
Tools and Materials Required
•
No special tools or materials required.
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
19216811.live