Page 136 / 210
Scroll up to view Page 131 - 135
Section 5, DLP-012
NetVanta 2000 Series System Manual
136
© 2002 ADTRAN, Inc.
61200361L1-1E
DLP-012
Perform Steps Below in the Order Listed
1.
Log in to the NetVanta 2000 series as
admin
(see DLP-001 for details).
2.
From the main menu (located across the top of the screen) select CONFIG.
10.10.10.2
to
10.10.10.20
10.10.10.70
to
10.10.10.9
10.10.10.150
to
10.10.10.170
10.10.10.1
(LAN Address)
Page 137 / 210
NetVanta 2000 Series System Manual
Section 5, DLP-012
61200361L1-1E
© 2002 ADTRAN, Inc.
137
3.
From the menu list (located on the left side of the screen) select DHCP Server. The DHCP Server
Configuration page will appear.
4.
Click the DHCP Enable Yes radio button to enable the DHCP server. The DHCP server is enabled by
default.
Page 138 / 210
Section 5, DLP-012
NetVanta 2000 Series System Manual
138
© 2002 ADTRAN, Inc.
61200361L1-1E
5.
Enter the selected range of IP addresses to be assigned by the NetVanta 2000 series DHCP server in
the IP Address Range 1-3 fields. If only one range of IP addresses are desired, enter them in the IP
Address Range 1 field. For our example we will enter three separate ranges.
6.
Enter the LAN IP address of the NetVanta 2000 series unit in the Gateway IP Address field. For our
Page 139 / 210
NetVanta 2000 Series System Manual
Section 5, DLP-012
61200361L1-1E
© 2002 ADTRAN, Inc.
139
7.
Enter the IP address for the primary DNS server you wish the NetVanta 2000 series to use in the DNS
1 field. For our example we will use the DNS capability of the NetVanta 2000 series so we will enter the
LAN IP address (10.10.10.1) in the DNS 1 field. You may enter a secondary DNS server in the DNS 2
field.
8.
Enter the number of seconds you want the NetVanta 2000 series to use for the active lease timer in
the Lease Duration field. We will use the default 43,200 seconds for this example.
Page 140 / 210
Section 5, DLP-012
NetVanta 2000 Series System Manual
140
© 2002 ADTRAN, Inc.
61200361L1-1E
19216811.live