Page 156 / 210
Scroll up to view Page 151 - 155
Section 5, DLP-015
NetVanta 2000 Series System Manual
156
© 2002 ADTRAN, Inc.
61200361L1-1E
DLP-015
Perform Steps Below in the Order Listed
1.
Log in to the NetVanta 2000 series as
admin
(see DLP-001 for details).
2.
From the main menu (located across the top of the screen) select
P
OLICIES
. The
M
ANAGE
L
ISTS
menu
and
U
SER
G
ROUP
submenu are automatically displayed.
Page 157 / 210
NetVanta 2000 Series System Manual
Section 5, DLP-015
61200361L1-1E
© 2002 ADTRAN, Inc.
157
3.
From the menu list (located on the left side of the screen) select
IP A
DDRESS
(listed as a
M
ANAGE
L
ISTS
submenu).
4.
Click the Add button in the IP Address dialog box.
The IP Address Configuration page will appear.
Page 158 / 210
Section 5, DLP-015
NetVanta 2000 Series System Manual
158
© 2002 ADTRAN, Inc.
61200361L1-1E
5.
Enter a descriptive name for the IP address in the IP Name field. This is a character field and spaces
are not allowed.
6.
Specify what type of IP address this record will hold. The IP Address Component Table can hold single
IP addresses, a range of IP addresses, an entire subnet of addresses, or any address. Click the
appropriate radio button.
Page 159 / 210
NetVanta 2000 Series System Manual
Section 5, DLP-015
61200361L1-1E
© 2002 ADTRAN, Inc.
159
7.
Enter the IP address for this record in the
IP A
DDRESS
1
and
2
fields located at the bottom of the IP
Address Configuration dialog box. Enter a single IP address in the
IP A
DDRESS
1
field. Enter a range
using both fields. Enter a subnet of IP addresses by putting the network IP address in the
IP A
DDRESS
1
field and the subnet mask for that network in the
IP A
DDRESS
2
field.
8.
Click the Submit button to add the configured IP address to the IP Address component table. If the IP
address is successfully added the IP Address page will appear and the added address will be listed.
Page 160 / 210
Section 5, DLP-015
NetVanta 2000 Series System Manual
160
© 2002 ADTRAN, Inc.
61200361L1-1E
9.
Follow the procedures in
DLP-003
to save the settings to non-volatile memory.
Follow-up Procedures
Once this procedure is complete, return to the procedure which referred you to this DLP and continue with
the tasks indicated there.
19216811.live