Page 161 / 210
Scroll up to view Page 156 - 160
61200361L1-1E
© 2002 ADTRAN, Inc.
161
ADDING A SERVICE TO THE SERVICES COMPONENT TABLE
Introduction
When configuring the NetVanta 2000 series, references to specific services (using port numbers) can be
used over and over again in many different components of the setup. To make the configuration process
easier, the NetVanta 2000 series is equipped with a Services Component Table. The Services Component
Table stores entered services (using port numbers) for use throughout the configuration. This DLP
discusses adding a service to this table.
Prerequisite Procedures
This DLP assumes the NetVanta 2000 series is connected to a PC and a browser session is active. Refer to
DLP-001 for more details.
Tools and Materials Required
•
No special tools or materials required.
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Page 162 / 210
Section 5, DLP-016
NetVanta 2000 Series System Manual
162
© 2002 ADTRAN, Inc.
61200361L1-1E
DLP-016
Perform Steps Below in the Order Listed
1.
Log in to the NetVanta 2000 series as
admin
(see DLP-001 for details).
2.
From the main menu (located across the top of the screen) select
P
OLICIES
. The
M
ANAGE
L
ISTS
menu
and
U
SER
G
ROUP
submenu are automatically displayed.
Page 163 / 210
NetVanta 2000 Series System Manual
Section 5, DLP-016
61200361L1-1E
© 2002 ADTRAN, Inc.
163
3.
From the menu list (located on the left side of the screen) select
S
ERVICES
(listed as a
M
ANAGE
L
ISTS
submenu).
4.
Click the Add button in the Services dialog box.
The Service Configuration page will appear.
Page 164 / 210
Section 5, DLP-016
NetVanta 2000 Series System Manual
164
© 2002 ADTRAN, Inc.
61200361L1-1E
5.
Enter a descriptive name for the IP address in the IP Name field. This is a character field and spaces
are not allowed.
6.
Specify whether this uses TCP or UDP protocol by selecting the appropriate radio button next to the
protocol.
Page 165 / 210
NetVanta 2000 Series System Manual
Section 5, DLP-016
61200361L1-1E
© 2002 ADTRAN, Inc.
165
7.
Enter the port number associated with the service for this record in the Port Number field.
8.
Click the Submit button to add the configured service to the Services component table. If the service is
successfully added the Services page will appear and the added service will be listed.
19216811.live