Page 111 / 210
Scroll up to view Page 106 - 110
NetVanta 2000 Series System Manual
Section 5, DLP-007
61200361L1-1E
© 2002 ADTRAN, Inc.
111
7.
Scroll to the bottom of the screen and click the
S
UBMIT
button.
8.
Follow the procedures outlined in DLP-003 to save the settings to nonvolatile memory.
Follow-up Procedures
Once this procedure is complete, return to the procedure which referred you to this DLP and continue with
the tasks indicated there.
For most applications, the
S
ERVICE
N
AME
and
AC N
AME
(Access Concentrator) fields
should remain blank. Only populate these fields if specific information has been provided
by the service provider.
Page 112 / 210
Section 5, DLP-007
NetVanta 2000 Series System Manual
112
© 2002 ADTRAN, Inc.
61200361L1-1E
Page 113 / 210
61200361L1-1E
© 2002 ADTRAN, Inc.
113
UPGRADING THE FIRMWARE OF THE NETVANTA 2000 SERIES
Introduction
The NetVanta 2000 series supports firmware updates via the LAN and WAN interfaces and an active
A
DMIN
login session. Using an active browser session and the provided GUI, the NetVanta 2000 series may
be upgraded by loading firmware files(
.bin
) into the unit.
Prerequisite Procedures
This DLP assumes the NetVanta 2000 series is connected to a PC and a browser session is active. Refer to
DLP-001 for more details.
Tools and Materials Required
•
No special tools or materials are required.
The NetVanta 2000 series upgrade firmware feature is only available using the Internet
Explorer web browser.
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Page 114 / 210
Section 5, DLP-008
NetVanta 2000 Series System Manual
114
© 2002 ADTRAN, Inc.
61200361L1-1E
DLP-008
Perform Steps Below in the Order Listed
1.
Log in to the NetVanta 2000 series as
admin
(see DLP-001 for details).
2.
From the main menu (located across the top of the screen), select
A
DMIN
.
Page 115 / 210
NetVanta 2000 Series System Manual
Section 5, DLP-008
61200361L1-1E
© 2002 ADTRAN, Inc.
115
3.
From the menu list (located down the left side of the screen), select
U
PGRADE
F
IRMWARE
. While this
page is loading, you will be asked to install and run a Java applet distributed by ADTRAN, Inc., and
verified by VeriSign Commercial Software Publishers. If security is not enabled on your internet
browser, the screen below will not be shown.
4.
Click
Y
ES
to install and run the Java applet.
The Java script must be installed for the firmware update capabilities to function properly.
19216811.live