Page 106 / 210
Scroll up to view Page 101 - 105
Section 5, DLP-006
NetVanta 2000 Series System Manual
106
© 2002 ADTRAN, Inc.
61200361L1-1E
5.
Scroll to the bottom of the screen and click the
S
UBMIT
button. The screen will blink and you will return
to the Ethernet Config page.
6.
Follow the procedures outlined in DLP-003 to save the settings to nonvolatile memory.
Follow-up Procedures
Once this procedure is complete, return to the procedure which referred you to this DLP and continue with
the tasks indicated there.
Page 107 / 210
61200361L1-1E
© 2002 ADTRAN, Inc.
107
CONFIGURING THE WAN INTERFACE FOR PPP
O
E ADDRESSING
Introduction
The NetVanta 2000 series supports three IP addressing schemes on the WAN interface -- dynamic, static,
and PPP over Ethernet (PPPoE). This DLP discusses the procedure for using the PPPoE addressing
scheme.
Prerequisite Procedures
This DLP assumes the NetVanta 2000 series is connected to a PC and a browser session is active. Refer to
DLP-001 for more details.
Tools and Materials Required
•
No special tools or materials are required.
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Page 108 / 210
Section 5, DLP-007
NetVanta 2000 Series System Manual
108
© 2002 ADTRAN, Inc.
61200361L1-1E
DLP-007
Perform Steps Below in the Order Listed
1.
Log in to the NetVanta 2000 series as
admin
(see DLP-001 for details).
2.
From the main menu (located across the top of the screen), select
C
ONFIG
. The
G
ENERAL
page will
appear.
Page 109 / 210
NetVanta 2000 Series System Manual
Section 5, DLP-007
61200361L1-1E
© 2002 ADTRAN, Inc.
109
3.
From the menu list (located on the left side of the screen) select
N
ETWORK
I
NTERFACE
. The Ethernet
Config page will appear.
4.
Select the
PPP
OVER
E
THERNET
radio button in the
WAN IP T
YPE
C
ONFIGURATION
section.
Page 110 / 210
Section 5, DLP-007
NetVanta 2000 Series System Manual
110
© 2002 ADTRAN, Inc.
61200361L1-1E
5.
Enter the username (provided by your service provider) in the
U
SERNAME
field in the
PPP
OVER
E
THERNET
configuration section.
6.
Enter the password for the username entered in Step 4 in both the
P
ASSWORD
and
P
ASSWORD
C
ONFIRMATION
fields.
19216811.live