Page 86 / 210
Scroll up to view Page 81 - 85
Section 5, DLP-002
NetVanta 2000 Series System Manual
86
© 2002 ADTRAN, Inc.
61200361L1-1E
Page 87 / 210
61200361L1-1E
© 2002 ADTRAN, Inc.
87
SAVING THE CURRENT SETTINGS OF THE NETVANTA
Introduction
After making a configuration change in the NetVanta 2000 series, it is necessary to save the new settings to
non-volatile memory. If the changes are not saved, a power loss to the NetVanta 2000 series will result in a
configuration loss. This DLP details the process for saving settings to NetVanta 2000 series non-volatile
memory.
Prerequisite Procedures
This procedure assumes that the NetVanta 2000 series unit is connected to a PC with an internet browser
and is powered up. Refer to DLP-001 for instructions on connecting the PC to the NetVanta 2000 series
LAN port and logging in to the NetVanta 2000 series system.
Tools and Materials Required
•
No special tools or materials are required.
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Page 88 / 210
Section 5, DLP-003
NetVanta 2000 Series System Manual
88
© 2002 ADTRAN, Inc.
61200361L1-1E
DLP-003
Perform Steps Below in the Order Listed
1.
Log in to the NetVanta 2000 series as
admin
(see DLP-001 for details).
2.
From the main menu (located across the top of the screen), select
A
DMIN
.
Page 89 / 210
NetVanta 2000 Series System Manual
Section 5, DLP-003
61200361L1-1E
© 2002 ADTRAN, Inc.
89
3.
From the menu list (located on the left side of the screen), select
S
AVE
S
ETTINGS
. The save settings
confirmation page will display.
4.
Select Yes to save the current NetVanta 2000 series settings to non-volatile memory. A status page
will display when the settings have been successfully saved.
Page 90 / 210
Section 5, DLP-003
NetVanta 2000 Series System Manual
90
© 2002 ADTRAN, Inc.
61200361L1-1E
Follow-up Procedures
Once this procedure is complete, return to the procedure which referred you to this DLP and continue with
the tasks indicated there.
19216811.live