Page 76 / 210
Scroll up to view Page 71 - 75
Section 5, DLP-5
NetVanta 2000 series System Manual
76
© 2002 ADTRAN, Inc.
61200361L1-1E
Page 77 / 210
61200361L1-1E
© 2002 ADTRAN, Inc.
77
CONNECTING TO THE NETVANTA 2000 SERIES
Introduction
The NetVanta 2000 series can be accessed and managed via the LAN interface using an ethernet crossover
cable (provided). Alternately, the NetVanta 2000 series may be acceslsed using a hub and two ethernet
cables (one for the PC and one for the NetVanta 2000 series). Using a PC with an installed browser
(Internet Explorer 5.5 for optimal viewing), the NetVanta 2000 series can be configured using an easy
GUI.
Prerequisite Procedures
The NetVanta 2000 series should be accessible to connect to a PC with an installed browser.
Tools and Materials Required
•
Ethernet crossover cable (provided)
•
DHCP-enabled PC with installed browser
This DLP assumes that a PC with DHCP-client software enabled will be used when
initially connecting to the NetVanta 2000 series
.
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Page 78 / 210
Section 5, DLP-001
NetVanta 2000 Series System Manual
78
© 2002 ADTRAN, Inc.
61200361L1-1E
DLP-001
Perform Steps Below in the Order Listed
1.
Connect power to the NetVanta 2000 series using the provided wallmount power supply.
2.
Connect the NetVanta 2000 series LAN interface to the PC using the provided ethernet crossover
cable.
3.
Supply power to the PC and begin the operating system bootup process. During the bootup process,
the PC will obtain an IP address from the NetVanta 2000 series DHCP server. Alternately, complete
the process for releasing and renewing captured IP addresses to obtain a new IP address from the
NetVanta 2000 series DHCP server. Please refer to your specific operating system documentation for
your PC details on that process.
4.
Open your installed browser and in the URL field enter
10.10.10.1. The NetVanta 2000 series login
screen will appear.
5.
Enter your username and password and click the login button. When connecting to the NetVanta 2000
series for the first time, the username is
admin
and there is no set password.
ADTRAN strongly recommends immediately changing the
admin
password for security
purposes. Refer to DLP-002 for details.
Page 79 / 210
NetVanta 2000 Series System Manual
Section 5, DLP-001
61200361L1-1E
© 2002 ADTRAN, Inc.
79
6.
After logging in to the NetVanta 2000 series, the welcome screen will appear.
Follow-up Procedures
Once this procedure is complete, return to the procedure which referred you to this DLP and continue with
the tasks indicated there.
Page 80 / 210
Section 5, DLP-001
NetVanta 2000 Series System Manual
80
© 2002 ADTRAN, Inc.
61200361L1-1E
19216811.live