Page 81 / 210
Scroll up to view Page 76 - 80
61200361L1-1E
© 2002 ADTRAN, Inc.
81
CHANGING THE ADMIN PASSWORD IN THE NETVANTA
Introduction
This DLP explains how to change the existing admin password in the NetVanta 2000 series access list.
Prerequisite Procedures
This DLP assumes the NetVanta 2000 series is connected to a PC and a browser session is active. Refer to
DLP-001 for more details.
Tools and Materials Required
•
No special tools or materials are required.
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Page 82 / 210
Section 5, DLP-002
NetVanta 2000 Series System Manual
82
© 2002 ADTRAN, Inc.
61200361L1-1E
DLP-002
Perform Steps Below in the Order Listed
1.
Log in to the NetVanta 2000 series as
admin
(see DLP-001 for details).
2.
From the main menu (located across the top of the screen), select
A
DMIN
. This displays the
C
HANGE
P
ASSWORD
dialog box.
Page 83 / 210
NetVanta 2000 Series System Manual
Section 5, DLP-002
61200361L1-1E
© 2002 ADTRAN, Inc.
83
3.
Enter the existing password in the
O
LD
P
ASSWORD
data field. If this is the first time changing the
password in the NetVanta 2000 series, this field will be blank.
4.
Enter the new password in both the
N
EW
P
ASSWORD
data field and
C
ONFIRM
N
EW
P
ASSWORD
data
fields.
Page 84 / 210
Section 5, DLP-002
NetVanta 2000 Series System Manual
84
© 2002 ADTRAN, Inc.
61200361L1-1E
5.
You may enter a
S
ESSION
T
IMEOUT
(in seconds). Leaving this field blank results in a infinite
S
ESSION
T
IMEOUT
.
A Session Timeout less than 120 sec is not recommended. Having a short session
timeout will make it difficult to configure the NetVanta 2000 series before timing out.
Page 85 / 210
NetVanta 2000 Series System Manual
Section 5, DLP-002
61200361L1-1E
© 2002 ADTRAN, Inc.
85
6.
Once all fields are completed, click the
S
UBMIT
button to register the password change. Once the
S
UBMIT
button has been clicked, the
O
PERATION
R
ESULT
screen will appear.
7.
Click the
L
OGIN
A
GAIN
hyperlink and enter
admin
as the username and the new password in the
P
ASSWORD
field.
8.
Follow the procedures outlined in DLP-003 to save the settings to nonvolatile memory.
Follow-up Procedures
Once this procedure is complete, return to the procedure which referred you to this DLP and continue with
the tasks indicated there.
19216811.live