Page 91 / 210
Scroll up to view Page 86 - 90
61200361L1-1E
© 2002 ADTRAN, Inc.
91
SETTING THE TIME AND DATE IN THE NETVANTA
Introduction
Many security operations are time and date critical. This DLP provides the procedures for setting the
NetVanta 2000 series system time and date to ensure proper operation.
Prerequisite Procedures
This DLP assumes the NetVanta 2000 series is connected to a PC and a browser session is active. Refer to
DLP-001 for more details.
Tools and Materials Required
•
No special tools or materials are required.
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Page 92 / 210
Section 5, DLP-004
NetVanta 2000 Series System Manual
92
© 2002 ADTRAN, Inc.
61200361L1-1E
DLP-004
Perform Steps Below in the Order Listed
1.
Log in to the NetVanta 2000 series as
admin
(see DLP-001 for details).
2.
From the main menu (located across the top of the screen), select
C
ONFIG
.
Page 93 / 210
NetVanta 2000 Series System Manual
Section 5, DLP-004
61200361L1-1E
© 2002 ADTRAN, Inc.
93
3.
From the menu list (located on the left side of the screen), select
G
ENERAL
. The
G
ENERAL
C
ONFIGURATION
page will appear.
4.
Click the
C
HANGE
D
ATE
AND
T
IME
?
checkbox (located in the upper third of the screen).
Page 94 / 210
Section 5, DLP-004
NetVanta 2000 Series System Manual
94
© 2002 ADTRAN, Inc.
61200361L1-1E
5.
Select the appropriate time zone from the
T
IME
Z
ONE
drop-down menu (located in the upper third of the
screen).
6.
Enter the
S
YSTEM
D
ATE
and
S
YSTEM
T
IME
in the appropriate fields.
Page 95 / 210
NetVanta 2000 Series System Manual
Section 5, DLP-004
61200361L1-1E
© 2002 ADTRAN, Inc.
95
7.
Alternately, enter the address of a time server to be used (instead of the local NetVanta 2000 series
date and time) in the
T
IME
S
ERVER
A
DDRESS
field.
8.
Scroll to the bottom of the page and click the
S
UBMIT
button.
19216811.live