Page 191 / 300
Scroll up to view Page 186 - 190
P-663HN-51 User’s Guide
191
C
HAPTER
24
Time
This chapter covers how to set the time in the ZyXEL Device.
24.1
Time Setup
Click
Management
>
Internet Time
to open the following screen. Use this
screen to configure how the ZyXEL Device synchronizes its internal clock with a
time server on the Internet.
Figure 96
Management > Internet Time
The following table describes the labels in this screen.
Table 68
Management > Internet Time
LABEL
DESCRIPTION
Automatically
synchronize with
Internet time
servers
Select this radio button to have the ZyXEL Device get the time and
date from the NTP time server you specify. See RFC 1305 for details
on NTP.
First NTP time
server
Enter the IP address or URL of the time server that the ZyXEL Device
should use to update time and date settings.
Second NTP time
server
Enter the IP address or URL of the time server that the ZyXEL Device
should use to update time and date settings if it cannot get a response
from the first time server.
Page 192 / 300
Chapter 24 Time
P-663HN-51 User’s Guide
192
Time Zone
Choose the time zone of your location. This sets the time difference
between your time zone and Greenwich Mean Time (GMT).
Save/Apply
Click this button to save the changes and have the ZyXEL Device start
using them.
Table 68
Management > Internet Time (continued)
LABEL
DESCRIPTION
Page 193 / 300
P-663HN-51 User’s Guide
193
C
HAPTER
25
Access Control
This chapter describes how to configure access control.
25.1
Access Control Screen
Use the access control screens to enable or disable service access to the ZyXEL
Device.
25.2
Service Access Control Screen
To open this screen, click
Management > Access Control
>
Services
.
Figure 97
Management > Access Control > Services
Page 194 / 300
Chapter 25 Access Control
P-663HN-51 User’s Guide
194
The following table describes the labels in this screen.
25.3
IP Addresses
This
screen lists the IP addresses of trusted computers that may manage the
ZyXEL Device. To open this screen, click
Management > Access Control
>
IP
Addresses
.
Figure 98
Management > Access Control > IP Addresses
The following table describes the labels in this screen.
Table 69
Management > Access Control > Services
LABEL
DESCRIPTION
Services
Services you may use to access the ZyXEL Device are listed here.
LAN
Select the
Enable
check boxes for the corresponding services that
you want to allow to access the ZyXEL Device from the LAN.
WAN
Select the
Enable
check boxes for the corresponding services that
you want to allow to access the ZyXEL Device from the WAN.
Save/Apply
Click this button to save the changes and have the ZyXEL Device start
using them.
Table 70
Management > Access Control > IP Addresses
LABEL
DESCRIPTION
Access Control
Mode
Enable this to have the ZyXEL Device check the source IP address of
incoming local management sessions.
IP Address
This is the IP address of a trusted computer from which you can
manage the ZyXEL Device.
Page 195 / 300
Chapter 25 Access Control
P-663HN-51 User’s Guide
195
25.4
Adding IP Addresses
Use this
screen to add IP addresses of trusted computers that may manage the
ZyXEL Device. To open this screen, click
Management > Access Control
>
IP
Addresses > Add
.
Figure 99
Management > Access Control > IP Addresses > Add
The following table describes the labels in this screen.
25.5
Passwords
Click
Management > Access Control
>
Passwords
to open the following
screen. Use this screen to configure the ZyXEL Device’s passwords.
Remove
To remove an entry, select its
Remove
check box and click the
Remove
button.
Add
Click this button to go to a screen where you can configure settings
for a new trusted IP address.
Table 70
Management > Access Control > IP Addresses (continued)
LABEL
DESCRIPTION
Table 71
Management > Access Control > IP Addresses > Add
LABEL
DESCRIPTION
IP Address
Specify the IP address of a trusted computer from which you want to
manage the ZyXEL Device.
Save/Apply
Click this button to save the changes and have the ZyXEL Device start
using them.